RLC Circuits (Resistor-Inductor-Capacitor Circuits)
1. Introduction
An RLC circuit is an electrical circuit that contains three basic electronic components:
- R — Resistor: Limits the flow of electric current and converts electrical energy into heat.
- L — Inductor: Stores energy in a magnetic field.
- C — Capacitor: Stores energy in an electric field.
RLC circuits are commonly used in radio receivers, filters, oscillators, tuning circuits, and many other electronic systems.
Penjelasan Rangkaian Seri RLC pada Arus Bolak-Balik | Fisika Kelas 12
File:RLC parallel circuit v1.svg - Wikimedia Commons
2. Components of an RLC Circuit
ROX5SSJ100K TE Connectivity Passive Product | Resistors | DigiKey
Resistor (R)
A resistor opposes current flow and dissipates energy as heat.
- Symbol:
- Unit: ohm ()
- Relationship:
Understanding the role of inductors in power electronics
Inductor (L)
An inductor opposes changes in current and stores energy in a magnetic field.
- Symbol:
- Unit: henry (H)
- Relationship:
Suntan TS170R1H473MSBFA0R 0.047uF 20% 50V Y5V 2.54mm Radial Ceramic Capacitor | Rapid Electronics
Capacitor (C)
A capacitor stores electrical energy and opposes sudden changes in voltage.
- Symbol:
- Unit: farad (F)
- Relationship:
3. Types of RLC Circuits
RLC circuits are mainly classified according to how their components are connected.
A. Series RLC Circuit
In a series RLC circuit, the resistor, inductor, and capacitor are connected one after another in a single path.
Simplified series RLC circuit with an AC source.
Characteristics:
- The same current flows through all three components.
- The supply voltage is shared among the resistor, inductor, and capacitor.
- At resonance, the inductive and capacitive effects cancel each other.
- The circuit can select a particular frequency.
B. Parallel RLC Circuit
In a parallel RLC circuit, the resistor, inductor, and capacitor are connected across the same two nodes.
Simplified parallel RLC circuit with an AC source.
Characteristics:
- The same voltage appears across all three branches.
- The total current is the sum of the branch currents.
- At ideal parallel resonance, the source current is at its minimum and the input impedance is at its maximum.
4. How an RLC Circuit Works
The operation of an RLC circuit depends on the interaction between the resistor, inductor, and capacitor.
- The resistor converts electrical energy into heat.
- The inductor stores and releases energy through its magnetic field.
- The capacitor stores and releases energy through its electric field.
In an AC circuit, the capacitor and inductor respond differently to frequency. Their combined effects determine the current, voltage, and resonant frequency of the circuit.
5. Important Formulas of RLC Circuits
| Quantity | Formula | Unit |
|---|---|---|
| Resistance | Ohm () | |
| Inductive reactance | Ohm () | |
| Capacitive reactance | Ohm () | |
| Series impedance | Ohm () | |
| Current | Ampere (A) | |
| Resonant frequency | Hertz (Hz) | |
| Quality factor (series) | Dimensionless |
Where:
- = supply frequency in hertz
- = inductance in henries
- = capacitance in farads
- = resistance in ohms
- = impedance
- = RMS supply voltage for steady-state AC calculations
- = RMS circuit current
6. Inductive and Capacitive Reactance
Reactance is the opposition that an inductor or capacitor offers to alternating current (AC).
Inductive reactance ()
An inductor offers greater opposition as frequency increases.
For example, if and :
Capacitive reactance ()
A capacitor offers less opposition as frequency increases.
For example, if and :
The important difference is that inductive reactance increases with frequency, while capacitive reactance decreases with frequency.
7. Resonance in an RLC Circuit
Resonance occurs when the inductive reactance equals the capacitive reactance.
Therefore,
Solving for the resonant frequency:
At resonance in a series RLC circuit:
- Inductive and capacitive reactances cancel.
- Impedance becomes equal to resistance: .
- Current reaches its maximum for a fixed supply voltage.
- The power factor is unity in the ideal component model.
Example: Calculate resonant frequency
Suppose:
Using the formula:
The circuit's resonant frequency is approximately .
8. Impedance of a Series RLC Circuit
Impedance is the total opposition to AC current, combining resistance and reactance.
Consider a circuit with:
First, calculate impedance:
Now calculate current:
The current is approximately .
9. Damping in an RLC Circuit
Damping describes how quickly electrical oscillations decrease after a disturbance, such as switching or an initial capacitor charge.
The amount of damping depends on the resistance, inductance, and capacitance.
Underdamped
The current or voltage oscillates while its amplitude gradually decreases. This occurs when the resistance is relatively low.
How to find critical resistance in parallel damped circuit - Electrical Engineering Stack Exchange
Critically damped
The response returns to equilibrium as quickly as possible without oscillating, for the standard second-order response.
Overdamped
The response returns to equilibrium without oscillation, but more slowly than the critically damped response.
For a series RLC circuit, the damping ratio is
- : underdamped
- : critically damped
- : overdamped
10. Series and Parallel RLC Comparison
| Feature | Series RLC | Parallel RLC |
|---|---|---|
| Connection | Single path | Multiple branches |
| Current | Same through all components | Divides among branches |
| Voltage | Divides across components | Same across branches |
| At ideal resonance | Impedance is minimum | Impedance is maximum |
| Source current at resonance | Maximum | Minimum |
| Common use | Frequency selection and band-pass circuits | Tuned circuits and frequency rejection |
11. Applications of RLC Circuits
Variable Capacitors in Classic Radios: How Mechanical Tuning Finds a Station – IWISTAO HIFI MINIMART
Radio tuning circuits
RLC circuits help select a desired radio frequency while reducing unwanted frequencies.
Signal filters
They help pass or reject selected frequency ranges in audio and communication systems.
Powerful High Voltage Generator and Induction Heater – RoboticWorx
Oscillators
Resonant LC networks can help determine the oscillation frequency of electronic circuits.
REF_1KW_PSU_5G_SIC PSU Reference Board - Infineon Technologies | Mouser
Power electronics
RLC networks are used in switching power supplies, ripple filtering, and transient control.
12. Interactive RLC Resonant Frequency Calculator
Change the inductance and capacitance to calculate the ideal resonant frequency.
Inductance (L)
10 mH
1 mH
50 mH
100 mH
Capacitance (C)
100 µF
1 µF
500 µF
1000 µF
Calculated ideal resonant frequency
159.15 Hz
Formula: . Real circuits may have a different measured resonance due to component tolerances and parasitic effects.
13. Summary
An RLC circuit combines a resistor, inductor, and capacitor to control how an electrical system responds to different frequencies.
The key concepts are:
- Resistance: dissipates energy and affects damping.
- Inductive reactance: increases with frequency.
- Capacitive reactance: decreases with frequency.
- Resonance: occurs when .
- Series RLC: has minimum impedance and maximum source current at ideal resonance.
- Parallel RLC: has maximum input impedance and minimum source current at ideal resonance.
The most important formula is:
It calculates the ideal resonant frequency from the inductance and capacitance.