Ugenz Academy/IoT Tutorial

Circuit Diagrams

10 min read1,817 words

Reading progress

Keep learning

Circuit Diagrams

1. What Is a Circuit Diagram?

A circuit diagram is a graphical representation of an electrical or electronic circuit using standard symbols to show components and how they are connected.

Instead of drawing the actual physical appearance of every component, a circuit diagram uses symbols for resistors, capacitors, switches, batteries, LEDs, transistors, and other electronic components.

Circuit diagrams help engineers, students, and technicians understand, design, build, and troubleshoot electronic circuits.

What Is Electronics? A Beginner-Friendly Introduction

technochips.org

For example, an LED circuit diagram can show how a battery, resistor, and LED are connected to make the LED glow.

2. Why Are Circuit Diagrams Important?

Circuit diagrams are useful because they:

  • Show how electronic components are connected.
  • Make complex circuits easier to understand.
  • Help identify component values and connections.
  • Reduce wiring mistakes during circuit construction.
  • Help locate faults when a circuit does not work.
  • Provide a standard method for communicating circuit designs.

A circuit diagram represents electrical connections, not necessarily the physical positions of components on a breadboard or PCB.

3. Common Electrical and Electronic Symbols

Circuit diagrams use standard symbols so that people can understand a circuit regardless of the manufacturer's component shape.

23. Electric circuits – Conceptual Physics

Circuit Symbols: A Comprehensive Guide for Electronics Engineers

Dc Power Source Schematic Symbol

7

Here are some of the most common symbols and their functions.

ComponentSymbol notationFunction
Battery+;−+\\;-Supplies electrical energy
ResistorRRLimits current or divides voltage
CapacitorCCStores electrical charge
InductorLLStores energy in a magnetic field
DiodeDDAllows current primarily in one direction
LEDLEDLEDProduces light when forward-biased
SwitchSSOpens or closes a circuit
GroundGNDReference point for circuit voltage
TransistorQActs as a switch or amplifier
FuseFProtects against excessive current
Operational amplifierU or ICAmplifies a difference between input voltages

The exact symbol style can vary slightly between standards, such as IEC and ANSI. The symbols in a real schematic should be interpreted according to the drawing's conventions.

4. Basic Parts of a Circuit Diagram

Most simple electronic circuits contain a few fundamental parts.

Battery Holder for 2 AA Batteries | Battery Mart

1. Power source

Supplies the voltage required for circuit operation. Examples include batteries, DC adapters, and regulated power supplies.

전자부품 저항의 종류 및 특징

2. Passive components

Resistors, capacitors, and inductors control current, voltage, timing, and energy storage.

File:Electronic-Component-Red-LED.jpg - Wikimedia Commons

3. Output components

LEDs, buzzers, displays, motors, and speakers provide a visible, audible, or mechanical result.

Mini Pushbutton Switch — Little Bird

4. Control components

Switches, transistors, logic gates, and microcontrollers determine when or how the circuit operates.

5. Example 1: Simple LED Circuit Diagram

A simple LED circuit demonstrates how a power supply, resistor, and LED work together.

무료 회로도 메이커 | 회로 그리기 | SciDraw AI

sci-draw.com

Components required

  • A suitable DC power supply.
  • One LED.
  • One current-limiting resistor.
  • Connecting wires.

Working principle

  1. The positive terminal of the supply connects to the resistor.
  2. The resistor connects to the LED's anode.
  3. The LED's cathode connects to the negative terminal.
  4. When the supply voltage is sufficient and the LED is forward-biased, current flows and the LED lights up.
  5. The resistor limits the current to a safe value.

Calculating the resistor

Ohm's law gives the required resistor value:

R=VS−VFI\boxed{R=\frac{V_S-V_F}{I}}

Where:

  • RR = Resistance in ohms.
  • VSV_S = Supply voltage.
  • VFV_F = LED forward voltage.
  • II = Desired LED current in amperes.

For example, assume a 5 V supply, a red LED with a forward voltage of 2 V, and a desired current of 10 mA.

R=5−20.01=300 ΩR=\frac{5-2}{0.01}=300\ \Omega

A standard 330 Ω330\ \Omega resistor would give approximately:

I=5−2330≈9.1 mAI=\frac{5-2}{330}\approx9.1\text{ mA}

This is a suitable example for many ordinary indicator LEDs, provided the LED's datasheet supports the selected current.

6. Example 2: Series Circuit Diagram

In a series circuit, components are connected along a single current path.

Characteristics of a series circuit

  • The same current flows through every component.
  • The supply voltage is divided across the components.
  • The total resistance is the sum of the individual resistances.
RT=R1+R2+R3\boxed{R_T=R_1+R_2+R_3}

For example, if two resistors of 100 Ω100\ \Omega and 220 Ω220\ \Omega are connected in series:

RT=100+220=320 ΩR_T=100+220=320\ \Omega

With a 9 V supply, the circuit current is:

I=9320=0.0281 AI=\frac{9}{320}=0.0281\text{ A} I≈28.1 mAI\approx28.1\text{ mA}

The voltage drops across the resistors add up to the supply voltage.

7. Example 3: Parallel Circuit Diagram

In a parallel circuit, components are connected across the same two electrical nodes, creating separate current paths.

Resistors in Parallel

physicsbootcamp.org

Characteristics of a parallel circuit

  • The voltage across each branch is the same.
  • The total current is the sum of the branch currents.
  • The total resistance is lower than the resistance of any individual branch, for ordinary positive resistances.

For two parallel resistors:

1RT=1R1+1R2\boxed{\frac{1}{R_T}=\frac{1}{R_1}+\frac{1}{R_2}}

Alternatively:

RT=R1R2R1+R2\boxed{R_T=\frac{R_1R_2}{R_1+R_2}}

If R1=100 ΩR_1=100\ \Omega and R2=100 ΩR_2=100\ \Omega:

RT=100×100100+100R_T=\frac{100\times100}{100+100} RT=50 Ω\boxed{R_T=50\ \Omega}

Parallel connections are widely used when different components need the same supply voltage.

8. Open Circuit and Closed Circuit

Study.com | Take Online Courses. Earn College Credit. Research Schools, Degrees & Careers

Open circuit

The current path is broken, so current does not flow through the open path.

Closed circuit

A complete conducting path allows current to flow when a voltage source is present.

An open circuit can occur because a switch is OFF, a wire is disconnected, or a component has failed. A closed circuit has a complete path for current.

A short circuit is different: it creates an unintended low-resistance path that can cause excessive current and damage components.

9. Understanding Connections and Junctions

Circuit diagrams use lines and junctions to show which terminals are electrically connected.

Reference:Electronics/Circuit symbols - SytBay Academics

skillstudy.miraheze.org

  • Connected wires: Lines meeting at a junction dot generally indicate an electrical connection.
  • Unconnected crossings: Depending on the drawing standard, crossing lines without a junction dot may indicate no connection.
  • Component terminals: Wires connect to the component's designated terminals.
  • Ground symbol: Identifies a circuit's reference node; it does not automatically mean a connection to earth ground.

Understanding junctions is important because two circuits can look similar while having very different electrical behavior.

10. Common Types of Circuit Diagrams

Bộ lọc thông thấp là gì? Ứng dụng của bộ lọc thông thấp - Giải pháp âm học

1. Analog circuit diagrams

Show circuits that process continuously varying voltages or currents, such as audio amplifiers, filters, and voltage regulators.

Basic Circuit Diagrams Solution | ConceptDraw.com

2. Digital circuit diagrams

Show logic gates, counters, flip-flops, processors, and circuits that process binary information.

How Does An Ac To Dc Power Supply Work at Anthony Sears blog

3. Power supply diagrams

Show how electrical power is converted or regulated using rectifiers, filters, regulators, and protection components.

GloveTalk (Converting Sign Language to Words) - Hackster.io

4. Microcontroller circuit diagrams

Show how a microcontroller connects to power supplies, sensors, displays, communication interfaces, and output devices.

11. Circuit Diagram vs. Wiring Diagram vs. PCB Layout

These three drawings represent different aspects of the same electronic design.

FeatureCircuit diagramWiring diagramPCB layout
Main purposeExplains electrical connections and functionShows practical wiring connectionsShows component placement and copper tracks
SymbolsStandard electronic symbolsOften shows terminals, wires, or physical componentsUses component footprints and board geometry
Physical positionsUsually not importantOften importantPrecisely defined
Common useDesign and troubleshootingAssembly and installationManufacturing circuit boards

electronic project - schematic circuit diagram

Audio Applications - Guitar Wiring

Vector printed circuit board of electronic device with conductors, components of radio elements - microcontroller, lcd display.

8

A schematic tells you what connects to what electrically. A wiring diagram helps you connect the actual parts. A PCB layout shows where components and conductive tracks go on a printed circuit board.

12. How to Read a Circuit Diagram

Use this sequence when examining an unfamiliar schematic.

  1. Identify the power source. Find the battery, DC input, AC input, or power-supply connections.
  2. Find ground and reference points. These help establish how voltages are measured and where current returns.
  3. Identify the components. Read their reference labels, such as R1 for a resistor, C1 for a capacitor, D1 for a diode, and Q1 for a transistor.
  4. Trace the connections. Follow wires and junctions to understand the current paths and signal paths.
  5. Check component values. Look for resistor values, capacitance, supply voltage, transistor types, and IC part numbers.
  6. Understand the operation. Determine what each section does, from the input stage through processing or control to the output stage.

13. Common Mistakes When Reading Circuit Diagrams

  • Confusing a wire crossing with an electrical junction.
  • Connecting an LED without a suitable current-limiting resistor.
  • Reversing the polarity of polarized components, such as electrolytic capacitors or many diodes.
  • Confusing the physical pin layout of an IC with its logical schematic symbol.
  • Assuming every ground symbol represents a protective earth connection.
  • Ignoring component ratings, supply voltage, or power dissipation.
  • Treating a schematic as an exact physical wiring layout.

A circuit can be drawn correctly but still fail if the actual components are wired incorrectly or operated outside their ratings.

14. Circuit Diagram Design Software

Circuit diagrams can be drawn using software instead of drawing every symbol manually.

  • KiCad — used for schematic capture and PCB design.
  • EasyEDA — browser-based schematic and PCB design.
  • LTspice — used to simulate many analog and power electronics circuits.
  • Tinkercad Circuits — useful for learning basic circuits and experimenting with Arduino-style projects.

15. Electrical Safety

Before building a circuit from a diagram:

  • Check the required supply voltage and polarity.
  • Verify resistor power ratings and component current limits.
  • Disconnect power before changing connections.
  • Avoid short circuits across batteries or power supplies.
  • Do not experiment with mains electricity unless properly trained and equipped.

In summary: Circuit diagrams are essential for understanding and building electronic systems. Learning component symbols, series and parallel connections, junctions, and power paths makes it much easier to read, design, and troubleshoot circuits.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy