Ugenz Academy/IoT Tutorial

Kirchhoff Voltage Law

8 min read1,464 words

Reading progress

Keep learning

Kirchhoff’s Voltage Law (KVL)

1. What Is Kirchhoff’s Voltage Law?

Kirchhoff’s Voltage Law (KVL) is a fundamental law of electrical circuits that states:

The algebraic sum of all voltages around any closed loop in a circuit is equal to zero.

In simple words, the total voltage supplied by a source equals the total voltage dropped across the components in a closed loop.

KVL is based on the principle of conservation of energy. As electric charge moves around a closed loop, the energy gained from voltage sources must balance the energy lost across circuit components.

Kirchhoff's Second Law | Gamatrain

gamatrain.com

For example, if a battery supplies 12 V to a circuit containing two resistors, and one resistor drops 5 V, the other resistor must drop 7 V.

12−5−7=012-5-7=0

Therefore,

VS=V1+V2\boxed{V_S=V_1+V_2}

Here, VSV_S is the source voltage, while V1V_1 and V2V_2 are the voltage drops across the two resistors.

2. Statement and Formula of KVL

Kirchhoff’s Voltage Law is commonly written in two forms.

Form 1: Sum of voltage rises equals sum of voltage drops

∑V_rise=∑V_drop\boxed{\sum V\_{\text{rise}}=\sum V\_{\text{drop}}}

Form 2: Algebraic sum of voltages around a closed loop equals zero

∑V=0\boxed{\sum V=0}

The second form includes positive and negative signs depending on the direction in which you travel around the circuit.

For example, consider a battery supplying 10 V and two components with voltage drops of 4 V and 6 V.

+10−4−6=0+10-4-6=0

The equation satisfies KVL because the algebraic sum of all voltages is zero.

3. Understanding KVL With a Circuit Diagram

Consider a simple circuit containing a 12 V battery and two resistors connected in series.

Illustrative closed-loop circuit with a 12 V source and voltage drops of 5 V and 7 V.

Suppose:

  • Battery voltage = 12 V
  • Voltage across resistor R1R_1 = 5 V
  • Voltage across resistor R2R_2 = 7 V

Applying KVL:

VS−V1−V2=0V_S-V_1-V_2=0

Substitute the values:

12−5−7=012-5-7=0 0=0\boxed{0=0}

The result confirms that the total voltage rise equals the total voltage drop.

4. Understanding Voltage Rise and Voltage Drop

To apply KVL correctly, it is important to understand voltage rises and drops.

A. Voltage rise

A voltage rise occurs when you move through a voltage source from its negative terminal to its positive terminal.

For example, moving through a 9 V battery from −- to ++ gives a voltage change of +9 V+9\text{ V}.

B. Voltage drop

A voltage drop occurs when you move through a component in the direction of the current through that component, using the passive sign convention.

For a resistor, the side where conventional current enters is marked positive, and the side where it leaves is marked negative.

Moving through the resistor in the direction of the current produces a voltage change of −IR-IR.

10.3 Kirchhoff’s Rules – University Physics Volume 2

pressbooks.online.ucf.edu

For a resistor, Ohm’s law gives:

V=IR\boxed{V=IR}

Where:

  • VV = voltage across the resistor, measured in volts (V)
  • II = current through the resistor, measured in amperes (A)
  • RR = resistance, measured in ohms (Ω\Omega)

The voltage change depends on the direction in which you travel around the circuit.

5. Sign Convention Used in KVL

When writing a KVL equation, choose a direction around the loop, either clockwise or counterclockwise, and use a consistent sign convention.

Component or movementVoltage sign
Battery: negative to positivePositive (+)
Battery: positive to negativeNegative (−)
Resistor: moving with conventional currentNegative (−)
Resistor: moving against conventional currentPositive (+)

These resistor rules assume the passive sign convention: current enters the resistor's positive terminal.

For example, if a 10 V battery supplies two resistors with voltage drops of 3 V and VxV_x, then:

+10−3−Vx=0+10-3-V_x=0

Rearrange:

Vx=10−3V_x=10-3 Vx=7 V\boxed{V_x=7\text{ V}}

Important: You can choose either loop direction. If you apply the signs consistently, both directions give the same physical result.

6. Solved Numerical Examples

Example 1: Finding an unknown voltage

A 15 V battery is connected in series with two components. The first component has a voltage drop of 6 V. Find the voltage drop across the second component.

Given:

VS=15 VV_S=15\text{ V} V1=6 V,V2=?V_1=6\text{ V},\qquad V_2=?

Using KVL:

VS=V1+V2V_S=V_1+V_2

Substitute:

15=6+V215=6+V_2 V2=15−6V_2=15-6 V2=9 V\boxed{V_2=9\text{ V}}

The second component has a voltage drop of 9 V.

Example 2: Finding current using KVL and Ohm’s law

A 12 V battery is connected to two series resistors: R1=2ΩR_1=2\Omega and R2=4ΩR_2=4\Omega. Find the current and voltage across each resistor.

Step 1: Apply KVL

12−I(2)−I(4)=012-I(2)-I(4)=0

Combine the resistances:

12−6I=012-6I=0 I=126I=\frac{12}{6} I=2 A\boxed{I=2\text{ A}}

Step 2: Find the voltage across each resistor

For the first resistor:

V1=IR1=2×2V_1=IR_1=2\times2 V1=4 V\boxed{V_1=4\text{ V}}

For the second resistor:

V2=IR2=2×4V_2=IR_2=2\times4 V2=8 V\boxed{V_2=8\text{ V}}

Step 3: Verify KVL

12−4−8=012-4-8=0

Therefore, the current is 2 A, and the voltage drops are 4 V and 8 V.

Example 3: A circuit with two voltage sources

Suppose a single-loop circuit contains a 12 V source and a 5 V source opposing each other, with a total series resistance of 7Ω7\Omega. Find the current.

Assume the 12 V source drives the current in the chosen direction.

The net source voltage is:

V_net=12−5=7 VV\_{\text{net}}=12-5=7\text{ V}

Apply KVL:

12−5−7I=012-5-7I=0 7=7I7=7I I=1 A\boxed{I=1\text{ A}}

The current is 1 A in the direction driven by the stronger source. The two sources oppose one another, so their voltages subtract.

7. KVL in Series Circuits

In a series circuit, components share a single current path. The source voltage is divided among the components.

For nn series resistors:

VS=V1+V2+⋯+Vn\boxed{V_S=V_1+V_2+\cdots+V_n}

Using Ohm’s law:

VS=IR1+IR2+⋯+IRnV_S=IR_1+IR_2+\cdots+IR_n

Factor out the common current:

VS=I(R1+R2+⋯+Rn)V_S=I(R_1+R_2+\cdots+R_n)

The total series resistance is:

RT=R1+R2+⋯+RnR_T=R_1+R_2+\cdots+R_n

Therefore:

I=VSRT\boxed{I=\frac{V_S}{R_T}}

This shows how KVL and Ohm’s law work together to determine current and voltage drops in a series circuit.

8. KVL in Parallel Circuits

In a parallel circuit, each branch is connected across the same two nodes. Therefore, the voltage across each branch is the same as the supply voltage for an ideal source and ideal wires.

For two parallel resistors:

VS=V1=V2\boxed{V_S=V_1=V_2}

Consider a 9 V battery connected to two parallel resistors. The voltage across each resistor is 9 V.

V1=9 V,V2=9 VV_1=9\text{ V},\qquad V_2=9\text{ V}

KVL can be applied to each closed loop containing the source and a branch. For example:

9−V1=09-V_1=0

and

9−V2=09-V_2=0

Thus, KVL is useful for analyzing both series and parallel circuits, although parallel branch currents are often determined using Kirchhoff’s Current Law.

9. Applications of Kirchhoff’s Voltage Law

KVL is widely used in electrical and electronic engineering.

  • Series circuits: Calculate voltage drops across resistors and other components.
  • Mesh analysis: Develop equations for multiple loops in a circuit.
  • Power supplies: Analyze voltage distribution across circuit components.
  • Transistor circuits: Determine voltage relationships between transistor terminals and surrounding components.
  • Operational amplifiers: Analyze voltage relationships in feedback networks.
  • Battery circuits: Calculate the net voltage when sources are connected in series.
  • Troubleshooting: Compare measured voltages with expected voltage rises and drops.

10. Difference Between KCL and KVL

FeatureKirchhoff’s Current Law (KCL)Kirchhoff’s Voltage Law (KVL)
Main principleConservation of electric chargeConservation of energy
Applies toJunctions or nodesClosed loops
RuleIncoming current equals outgoing currentAlgebraic sum of voltages equals zero
Main quantityCurrent (A)Voltage (V)
Common formula∑I=0\sum I=0∑V=0\sum V=0

KCL explains how current divides at a junction, while KVL explains how voltage rises and drops balance around a closed loop.

11. Important Points to Remember

  • KVL states that the algebraic sum of voltages around a closed loop is zero.
  • It is based on the conservation of energy.
  • Voltage rises and drops must be assigned signs consistently.
  • In a simple series circuit, the source voltage equals the sum of the voltage drops.
  • KVL can be combined with Ohm’s law to calculate unknown voltages, currents, and resistances.
  • You can choose clockwise or counterclockwise loop traversal, provided you use a consistent sign convention.

In short: Kirchhoff’s Voltage Law helps you analyze the voltage distribution in an electrical circuit by ensuring that the total voltage rise and total voltage drop around each closed loop balance.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy