Inductors
1. Introduction
An inductor is a passive electronic component that stores energy in a magnetic field when electric current flows through it. It is commonly made by winding a conductive wire into a coil.
Inductors are widely used in power supplies, filters, transformers, radio-frequency circuits, and switching converters.
The ability of an inductor to oppose changes in current is called inductance, which is measured in henries (H).
Unlike a resistor, which dissipates electrical energy as heat, an ideal inductor stores energy in its magnetic field and can return that energy to the circuit.
Common applications of inductors include:
- Filtering electrical noise.
- Smoothing current in power supplies.
- Storing energy in switching converters.
- Creating magnetic fields.
- Tuning radio-frequency circuits.
- Helping transfer energy in transformer-based systems.
2. Construction of an Inductor
An inductor generally consists of three main parts.
1. Coil: A conductive wire wound into one or more loops. When current flows through the wire, it creates a magnetic field.
2. Core: The material inside or around the coil. It may be air, ferrite, iron, or another magnetic material. The core affects the inductance and magnetic behavior.
3. Terminals: The electrical connections used to connect the inductor to a circuit.
Some inductors use an air core, while others use magnetic cores to obtain greater inductance in a smaller size.
The number of turns, coil dimensions, core material, and magnetic path all affect the inductance.
3. Working Principle of an Inductor
An inductor works according to the principle of electromagnetic induction.
When electric current flows through a coil, it creates a magnetic field around the coil. If the current changes, the magnetic field also changes, inducing a voltage that opposes the change in current.
This behavior is described by Lenz's law.
The voltage across an ideal inductor is:
Where:
- = voltage across the inductor, in volts (V)
- = inductance, in henries (H)
- = rate of change of current, in amperes per second
This equation means that an inductor produces a larger voltage when the current changes more rapidly.
For example, if a 2 H ideal inductor has a current increasing at 3 A/s:
The voltage magnitude is 6 V, with its polarity determined by the direction of the current change and the chosen reference convention.
4. Inductance and Its Unit
Inductance is a measure of how strongly a component links magnetic flux with current and therefore opposes changes in current.
It is represented by the letter .
The standard unit of inductance is the henry (H).
| Unit | Symbol | Equivalent |
|---|---|---|
| Henry | H | 1 H |
| Millihenry | mH | H |
| Microhenry | μH | H |
| Nanohenry | nH | H |
Common inductance values include:
- 1 μH in some high-frequency circuits.
- 10 μH in switching power supplies.
- 100 μH in filters and converter circuits.
- 1 mH in signal and noise-filtering circuits.
- Several mH or more in some power and low-frequency applications.
The correct value depends on the circuit's operating frequency, current, voltage, core properties, and desired performance.
5. What Happens When an Inductor Is Connected to DC?
An inductor behaves differently during the switching and steady-state periods of a DC circuit.
A. When DC Is First Applied
When a DC voltage is applied to an inductor, the current does not instantly reach its final value in a real circuit.
The increasing current creates a changing magnetic field, which induces a voltage opposing the current's increase.
This limits how quickly the current rises.
B. During Steady-State DC
After the current becomes constant, the magnetic field also becomes constant. The ideal inductor's voltage then becomes zero:
Since the current is constant:
Therefore:
An ideal inductor behaves like a short circuit in steady-state DC.
A real inductor has wire resistance and other losses, so it still has a voltage drop and dissipates heat when current flows through it.
C. When DC Is Switched Off
When current decreases, the magnetic field collapses and the inductor produces a voltage that opposes the decrease in current.
This voltage can become large if the current is interrupted rapidly.
For this reason, switching circuits that use inductive loads, such as relays and motors, often require suitable protection against voltage spikes.
6. Types of Inductors
Inductors are available in different forms depending on their core material, construction, inductance, current rating, and intended application.
Acquista Jantzen Audio 000-1051 Induttore? - SoundImports
1. Air-Core Inductor
An air-core inductor uses air or a nonmagnetic support rather than a magnetic core.
It avoids magnetic-core saturation and is useful at relatively high frequencies.
Applications: Radio-frequency circuits, antennas, and tuned circuits.
Top Drum Coil Inductor Manufacturers From Ghaziabad, India
2. Ferrite-Core Inductor
A ferrite-core inductor uses a magnetic ceramic core that helps increase inductance and can reduce certain losses at suitable frequencies.
Applications: Switching power supplies, noise filters, and high-frequency converters.
3. Iron-Core Inductor
An iron-core inductor uses an iron-based magnetic core to increase inductance. Its properties depend on the core construction and operating frequency.
Applications: Low-frequency filters, chokes, and power-frequency equipment.
RS PRO - 7418880 - INDUCTOR SMD SHIELDED 68UH 12.5X12.5X6 - RS
4. SMD Power Inductor
A surface-mount power inductor is designed to be mounted directly on a printed circuit board. Many are compact and rated to handle the currents required by power converters.
Applications: ESP32 and other embedded-device power supplies, DC-DC converters, and portable electronics.
5. Toroidal Inductor
A toroidal inductor has wire wound around a ring-shaped magnetic core. Its closed magnetic path can help reduce external magnetic fields when properly designed.
Applications: Power supplies, filters, and electromagnetic interference suppression.
7. Energy Stored in an Inductor
An inductor stores energy in its magnetic field when current flows through it.
The energy stored in an ideal inductor is calculated using:
Where:
- = stored energy in joules (J)
- = inductance in henries (H)
- = current in amperes (A)
Example: Suppose a 2 H inductor carries a current of 3 A.
The inductor stores 9 joules of energy in its magnetic field under the ideal model.
The stored energy increases with inductance and with the square of current. Real inductors have losses, and magnetic-core inductors may saturate at sufficiently high current.
8. Inductors in Series
When inductors are connected in series and their magnetic fields do not significantly couple to one another, their inductances add together.
Example: Three uncoupled inductors of 2 mH, 3 mH, and 5 mH are connected in series.
The total inductance is 10 mH.
If the inductors are magnetically coupled, their mutual inductance must also be considered.
9. Inductors in Parallel
For ideal uncoupled inductors connected in parallel, the equivalent inductance follows the reciprocal formula:
For two inductors:
Example: Two uncoupled inductors of 6 mH and 3 mH are connected in parallel.
The equivalent inductance is 2 mH under the assumptions of ideal, uncoupled inductors.
10. Inductive Reactance in AC Circuits
When an inductor is connected to an AC source, its current and voltage continuously change. The inductor opposes this alternating current through a property called inductive reactance.
Inductive reactance is calculated using:
Where:
- = inductive reactance in ohms (Ω)
- = frequency in hertz (Hz)
- = inductance in henries (H)
Unlike capacitive reactance, inductive reactance increases as frequency increases.
Example: An ideal 0.1 H inductor is connected to a 50 Hz AC source.
Therefore:
For a sinusoidal AC circuit containing only this ideal inductor, the RMS current can be calculated by dividing the RMS voltage by the inductive reactance.
In an ideal inductive circuit, current lags voltage by 90 degrees.
11. Inductors in RL Circuits
An RL circuit contains a resistor (R) and an inductor (L).
RL circuits are used to control current changes, filter signals, suppress electrical interference, and analyze inductive loads.
The time constant of a simple series RL circuit is:
Where:
- = time constant in seconds
- = inductance in henries
- = total series resistance in ohms
Example: A 2 H inductor is connected in series with a 10 Ω resistor.
For a simple RL circuit driven by a DC voltage step, the current reaches approximately 63.2% of its final steady-state value after one time constant.
After about five time constants, it is approximately 99.3% of its final value.
This characteristic is important in relay circuits, motor control, and switching applications.
12. Inductors in Power Supplies
Inductors are essential in switching power supplies, particularly DC-DC converters.
In a switching converter, an electronic switch rapidly turns current on and off. The inductor stores energy during part of the switching cycle and releases energy during another part.
This process helps convert one DC voltage level into another efficiently.
Common examples include:
- Buck converter: Converts a higher DC voltage into a lower DC voltage.
- Boost converter: Converts a lower DC voltage into a higher DC voltage.
- Buck-boost converter: Can produce an output voltage above or below the input, depending on the topology.
Inductors also help reduce current ripple and smooth the output of many power converters.
The inductor must be selected according to its inductance, current rating, saturation current, winding resistance, core losses, and operating frequency.
13. Inductors vs Resistors vs Capacitors
| Feature | Resistor | Capacitor | Inductor |
|---|---|---|---|
| Main function | Opposes current flow | Stores energy in an electric field | Stores energy in a magnetic field |
| Main quantity | Resistance (Ω) | Capacitance (F) | Inductance (H) |
| Ideal DC steady state | Voltage drop depends on current | Open circuit | Short circuit |
| Energy behavior | Dissipates energy as heat | Stores and returns electric-field energy | Stores and returns magnetic-field energy |
| AC behavior | Resistance | Capacitive reactance decreases with frequency | Inductive reactance increases with frequency |
| Common applications | Current limiting and voltage division | Filtering and charge storage | Filtering and switching converters |
14. Applications of Inductors
Inductors are used in many electronic and electrical systems:
- Power supplies: Store and transfer energy in switching converters.
- Filters: Reduce unwanted noise and ripple.
- Transformers: Inductance and magnetic coupling are fundamental to transformer operation.
- Radio circuits: Form resonant circuits for tuning and frequency selection.
- Motors and relays: Coils create magnetic fields to produce motion or operate switches.
- EMI suppression: Chokes help reduce electromagnetic interference.
- Signal processing: Inductors work with capacitors and resistors to shape frequency responses.
The correct inductor depends on the required inductance, current, operating frequency, core material, resistance, temperature rise, and saturation limits.