Ugenz Academy/IoT Tutorial

Fuses

12 min read2,314 words

Reading progress

Keep learning

Fuses

1. Introduction to Fuses

A fuse is an electrical safety device designed to protect a circuit from excessive current. It contains a metal element that melts when the current flowing through it produces enough heat, breaking the circuit and stopping the current.

Fuses help protect wires, electronic components, and electrical equipment from damage caused by overloads and short circuits.

Fuses are commonly used in power supplies, household appliances, automobiles, battery systems, and industrial electrical equipment.

4A Glass Cartridge Fuse, 5mm x 20mm

Automotive Truck 2 Amp - 40 Amp Standard Blade Fuses ATO / ATC Fuse | eBay

C22G80 Eaton | Eaton 80A Ceramic Cartridge Fuse, 22 x 58mm | 703-8471 | RS

5

Example: If a circuit designed to operate safely at a certain current develops a fault that causes excessive current, a correctly selected fuse can melt and disconnect the power before the wiring or equipment overheats dangerously.

2. Basic Construction of a Fuse

A typical fuse contains several important parts.

WINWIN Electronics Blog | Electronics & PCB Insights

winwinchip.com

A. Fuse Element

The fuse element is a thin strip or wire made from a suitable conductive material. It is designed to melt under specified overcurrent conditions.

The material and dimensions determine how the fuse responds to current and heat.

B. Fuse Body

The body holds and protects the fuse element. It may be made of glass, ceramic, or another suitable insulating material.

Glass bodies allow the element to be inspected visually, while ceramic bodies can be designed for demanding applications involving high temperatures or fault currents.

C. Metal End Caps or Terminals

These provide electrical connections between the fuse element and the external circuit.

D. Filler Material

Some cartridge fuses contain materials such as silica sand around the fuse element. These materials help control the arc that may form when the element melts, improving interruption performance.

Not every fuse contains filler material.

3. Working Principle of a Fuse

A fuse works mainly because an electric current produces heat as it passes through a resistance.

The heat generated in a resistive element can be expressed as:

P=I2RP=I^2R

Where:

  • PP = power converted into heat, in watts (W)
  • II = current, in amperes (A)
  • RR = resistance, in ohms (Ω\Omega)

Because the heating effect depends on the square of the current, a sufficiently large increase in current can cause a substantial increase in heating.

How a fuse operates

Stage 1: Normal Operation

7040.3150 | Schurter 4 A TT Glass Cartridge Fuse, 5 x 20 mm | RS

no.rs-online.com

Current flows through the intact fuse element. Under normal operating conditions, the element remains below the temperature at which it melts.

Stage 2: Excessive Current

How Electric Fuses Work: Types, Ratings, and Selection Guide - Utmel

utmel.com

When excessive current flows for sufficient time, heat builds up in the element. The amount of time required depends on the magnitude of the current and the fuse's design.

Stage 3: Circuit Interruption

Blown fuse isolated

The element melts and opens the circuit. The fuse interrupts current, helping prevent further overheating and damage.

Important: A fuse does not necessarily melt immediately when current exceeds its rating slightly. Its operating time depends on the size and duration of the overcurrent.

4. Types of Fuses

Different fuses are designed for different currents, voltages, environments, and applications.

A. Glass Cartridge Fuse

GLASS TUBE FUSE, 5X20 MM SIZE, S 0652C5000-11 Bel Fuse Inc.製|電子部品・半導体通販のマルツ

marutsu.co.jp

A glass cartridge fuse contains a fuse element inside a transparent glass tube with metal caps at both ends.

Features:

  • The element can often be inspected visually.
  • Available in various current and voltage ratings.
  • Common in electronic equipment and small power supplies.

Applications: Electronic devices, chargers, instruments, and control circuits.

A visibly broken element often indicates a blown fuse, but visual inspection alone cannot reliably identify every failed fuse.

B. Ceramic Cartridge Fuse

RS PRO 1A T Ceramic Cartridge Fuse, 5 x 20 mm | RS

uk.rs-online.com

A ceramic fuse uses a ceramic body instead of a glass tube. Some designs include arc-quenching filler material.

Features:

  • Suitable designs can interrupt high fault currents.
  • Ceramic construction withstands high temperatures.
  • Available in a range of voltage and current ratings.

Applications: Power supplies, industrial equipment, and circuits requiring higher interruption capability.

A ceramic fuse is not automatically safer than a glass fuse in every application. Its ratings and specifications must match the circuit.

C. Automotive Blade Fuse

Automotive Truck 2 Amp - 40 Amp Standard Blade Fuses ATO / ATC Fuse | eBay

ebay.com

Automotive blade fuses have two metal blades and a compact insulating body. Different current ratings are often indicated by different colors.

Applications:

  • Car headlights
  • Vehicle audio systems
  • Dashboard electronics
  • Automotive control circuits
  • Auxiliary vehicle accessories

Blade fuses must be selected according to the vehicle's specified fuse type and rating.

D. Thermal Fuse

Thermal Fuse 121°C 230V AC 10A ESKA 770.121 | Rapid Electronics

rapidonline.com

A thermal fuse disconnects a circuit when its temperature reaches a specified threshold.

Unlike a conventional overcurrent fuse, a thermal fuse responds primarily to temperature rather than directly to the magnitude of the current.

Applications:

  • Electric irons
  • Hair dryers
  • Rice cookers
  • Motors and transformers
  • Other appliances requiring thermal protection

Many thermal fuses are one-time devices and must be replaced after they operate.

E. Resettable Fuse (PTC)

Bourns MF-R050-0-99 0.5A Multifuse | Rapid Electronics

rapidonline.com

A resettable PTC fuse is a component whose resistance increases sharply when it becomes sufficiently hot due to excessive current.

As the resistance rises, the current is limited. After the fault is removed and the component cools, its resistance generally returns toward its normal value.

Applications:

  • USB ports
  • Battery-powered electronics
  • Communication devices
  • Low-voltage electronic circuits

A resettable PTC does not necessarily open the circuit completely. It also has limits on its voltage, current, and fault-interruption capability.

F. High-Rupturing-Capacity (HRC) Fuse

What Is a High Rupturing Capacity (HRC) Fuse? Complete Guide for 2025

viox.com

An HRC fuse is designed to interrupt high fault currents safely within its specified ratings. Many designs use a ceramic body and arc-quenching filler.

Applications:

  • Industrial distribution systems
  • Motor circuits
  • Electrical panels
  • Power equipment

Its interrupting rating is especially important because a short circuit can produce currents far greater than the normal operating current.

G. Surface-Mount Fuse

Eaton Bussmann CC12H12A-TR - Cc12H12A-TR Chip Fuse

aiconsol.com

A surface-mount fuse is a compact component designed to be soldered directly onto a printed circuit board.

Applications:

  • Smartphones and portable electronics
  • Computer circuit boards
  • Battery protection circuits
  • Compact power supplies

Its small size makes it suitable for electronic devices where board space is limited.

5. Classification of Fuses by Operating Speed

Fuses are also classified according to how quickly they respond to excessive current.

Fuse typeOperating behaviorTypical use
Fast-actingOpens quickly under specified overcurrent conditionsSensitive electronic circuits
Time-delay or slow-blowTolerates certain short-duration current surgesMotors and power supplies with startup surges
Very-fast-actingDesigned for rapid interruption under specified conditionsSemiconductor protection
Resettable PTCIncreases resistance during an overcurrent eventLow-voltage electronic protection

The exact response depends on the fuse's current-time characteristic. The label alone is not enough to determine whether a particular fuse is suitable.

6. Fuse Ratings and Specifications

Selecting the correct fuse requires more than matching its current rating.

SpecificationMeaning
Rated currentCurrent the fuse is designed to carry under specified conditions
Rated voltageMaximum specified circuit voltage at which the fuse can safely interrupt current
Breaking capacityMaximum fault current the fuse can interrupt safely at the specified voltage and conditions
Time-current characteristicRelationship between overcurrent magnitude and operating time
Fuse sizePhysical dimensions and mounting style
Temperature ratingPermitted operating temperature range
DC or AC ratingWhether the fuse is rated for direct current, alternating current, or both

A. Current Rating

The current rating is expressed in amperes (A).

For example, a 2 A fuse is designed for a specified operating range around its rated current. It does not mean the fuse will always melt immediately at 2.01 A.

A fuse can carry its rated current under its specified conditions, while higher currents may cause it to open after a period determined by its time-current curve.

B. Voltage Rating

The voltage rating matters because the fuse must be capable of interrupting the circuit without sustaining a dangerous arc.

A fuse rated for a particular DC voltage should not automatically be assumed suitable for a higher voltage or for AC operation.

C. Breaking Capacity

Breaking capacity, also called interrupting rating, specifies the maximum fault current that a fuse can safely interrupt under stated conditions.

A fuse may have the correct current rating but an inadequate breaking capacity for the circuit.

7. Example of Fuse Selection

Consider a simple DC circuit with these characteristics:

  • Supply voltage: 12 V
  • Normal operating current: 1 A
  • Load: Electronic device

The fuse must be selected based on the device's specifications, expected current variations, wiring capacity, and possible fault conditions.

A 1 A fuse may be unsuitable if the device normally draws close to 1 A and requires a startup surge. A suitably rated fuse with an appropriate time-current characteristic might be needed instead.

The selected fuse must also have an adequate DC voltage rating and breaking capacity for the available fault current.

Key principle: A fuse is selected to protect the wiring and equipment against specified faults. It is not selected by voltage or current alone.

8. Fuse vs. Circuit Breaker

Both fuses and circuit breakers protect electrical circuits against overcurrent, but they operate differently.

FeatureFuseCircuit breaker
Operating methodFuse element meltsMechanical or electronic trip mechanism interrupts the circuit
After operationUsually must be replacedUsually can be reset after the fault is cleared
ResponseDepends on fuse characteristicsDepends on breaker and trip characteristics
CostOften inexpensiveOften more expensive
Moving partsNot required for the fuse element itselfMechanical breakers generally have moving parts
ProtectionOvercurrent and short-circuit protection, according to ratingOvercurrent and short-circuit protection, according to rating

A circuit breaker is not automatically better than a fuse for every application. Both must be correctly selected for the circuit's operating and fault conditions.

9. Fuse vs. Resistor

A fuse and a resistor may both have electrical resistance, but they serve different purposes.

FeatureFuseResistor
Main purposeProtects against excessive currentControls current or voltage in a circuit
Normal operationConducts current with low resistanceProvides a designed resistance
Under excessive currentDesigned to interrupt the circuitUsually continues conducting until its limits are exceeded
ReplacementNormally replaced after blowingReplaced if damaged or if the design requires it
Common applicationCircuit protectionVoltage division, biasing, and current limiting

A resistor should not be treated as a substitute for a properly rated fuse.

10. Advantages of Fuses

  1. Simple construction: Many fuses use a straightforward fuse element and insulating body.
  2. Fast protection: Suitable designs can interrupt fault currents quickly.
  3. Low cost: Many common fuse types are inexpensive.
  4. Reliable operation: A properly selected fuse can provide dependable protection.
  5. Compact size: Small fuses can fit into electronic devices and circuit boards.
  6. High fault-current interruption: Specially designed fuses can safely interrupt very large fault currents within their ratings.

11. Disadvantages of Fuses

  1. Replacement required: Most conventional fuses cannot be reset after operating.
  2. Downtime: The cause of the fault must be identified and the fuse replaced before normal operation resumes.
  3. Incorrect replacement risk: Installing a fuse with an excessive current rating can reduce protection.
  4. Selection complexity: Voltage rating, breaking capacity, response time, and operating conditions must all be considered.
  5. No universal protection: A fuse does not necessarily protect against every fault, such as all forms of overheating, leakage current, or electric shock.

12. Applications of Fuses

Fuses are widely used in:

  • Household appliances
  • Automotive electrical systems
  • Electronic power supplies
  • Battery-powered devices
  • Solar power systems
  • Industrial machinery
  • Control panels
  • Computer equipment
  • Chargers and adapters
  • Electrical distribution equipment

13. Important Safety Precautions

  • Always replace a fuse with the correct type and rating specified by the equipment manufacturer.
  • Never bypass a fuse with wire or foil.
  • Never install a fuse with a higher current rating simply because the original fuse keeps blowing.
  • Disconnect power before replacing a fuse and follow the equipment's safety instructions.
  • Investigate repeated fuse failures because they can indicate a short circuit, overload, or faulty component.
  • For mains electricity and high-energy battery systems, use appropriately rated components and qualified service personnel where necessary.

In summary: A fuse is a protective device that interrupts a circuit when excessive current causes its element to melt. Different fuses are designed for different applications, and their current rating, voltage rating, breaking capacity, and response time must all be appropriate for the circuit.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy