Ugenz Academy/IoT Tutorial

Connectors And Terminals

15 min read2,826 words

Reading progress

Keep learning

Connectors and Terminals

1. Introduction to Connectors and Terminals

Connectors and terminals are electrical components used to join wires, connect electronic components, and transfer electrical power or signals between different parts of a circuit.

A connector is a component designed to join and disconnect electrical connections. It often consists of two mating parts, such as a plug and a socket.

A terminal is a conductive connection point where a wire or component is attached to an electrical circuit.

Connectors and terminals are used in computers, mobile devices, Arduino and ESP32 projects, automobiles, industrial machines, power supplies, and household appliances.

JST/MX2.0/SM/Dupont 2.54mm Connector Kit

ELEMON - 282857-2 - BO5811847 - TE CONNECTIVITY: BORNE 2P P/CI VERDE P=5.08MM 24A/250V 282857-2 —Electrónica Elemon®

Glarks 360pcs 22-16/16-14/12-10 Gauge Quick Disconnect Electrical Insulated Spade Fork Ring Solderless Crimp Terminals Connectors Assortment Kit

9

Example: In an ESP32 project, jumper wires and header connectors connect sensors to the development board, allowing signals and power to travel between them.

2. Difference Between Connectors and Terminals

Although these terms are related, they have different purposes.

FeatureConnectorTerminal
Main purposeJoins electrical connections, often between separate partsProvides a point for attaching a wire or component
ConstructionOften includes mating partsMay be a screw clamp, metal lug, pin, or contact
Connection methodPlugging, locking, snapping, or matingScrewing, crimping, soldering, or clamping
Repeated disconnectionOften designed for repeated connection and disconnectionDepends on the terminal type
ExampleUSB connectorScrew terminal or ring terminal

A connector may contain multiple terminals or contacts. For example, a USB connector contains several contacts that carry power, ground, and data signals.

3. Basic Parts of a Connector

A typical electrical connector contains several parts.

A. Housing

The housing is the outer body that holds and protects the conductive contacts. It is commonly made from plastic or another insulating material.

B. Contacts

Contacts are conductive metal parts that transfer electrical current or signals between mating components. Copper alloys are commonly used because of their electrical conductivity and mechanical properties.

C. Insulation

The insulating body separates conductive contacts from one another and helps prevent unintended electrical connections.

D. Locking Mechanism

Many connectors include clips, latches, threaded collars, or other locking mechanisms to prevent accidental disconnection.

E. Cable Entry or Strain Relief

Some connectors include a feature that supports the cable and reduces stress on the electrical connection when the cable is pulled or bent.

4. How Connectors and Terminals Work

Connectors and terminals establish a conductive path between different circuit elements.

For example, consider a battery connected to an LED circuit through a terminal block.

  1. The battery wire is secured in the terminal.
  2. The terminal's conductive metal surface contacts the wire.
  3. The terminal connects to the circuit's conductive path.
  4. Current flows through the circuit when the electrical path is complete.

The quality of the connection matters. A loose or corroded connection can increase resistance, generate heat, or cause an intermittent signal.

The power dissipated at a resistive connection is:

P=I2RP=I^2R

Where:

  • PP = power dissipated as heat, in watts (W)
  • II = current, in amperes (A)
  • RR = resistance at the connection, in ohms (Ω\Omega)

Even a small connection resistance can produce significant heating when the current is high.

5. Types of Connectors

A. USB Connectors

身近なのに複雑怪奇、USB規格のおさらい【第1回】基礎知識編 | 株式会社アスク

USB-C Connector Pinout: What to know

USB kabel - Altijd de juiste aansluiting - Kabelshop.nl

6

USB stands for Universal Serial Bus. USB connectors carry digital data and, depending on the implementation, electrical power.

Common types include:

  • USB Type-A: Common on computers, chargers, and USB accessories.
  • USB Type-C: A reversible connector used in many modern phones, computers, and electronic devices.
  • Micro-USB: Found in many older phones and electronic devices.
  • USB Type-B: Common in some printers and other peripheral equipment.

Applications: Data transfer, device communication, charging, and powering compatible electronics.

Important: The connector shape alone does not determine supported charging power or data speed. These depend on the device, cable, and USB implementation.

B. Pin Header Connectors

Buy 40 Pin Male & Female Pin Header Strips – High-Quality Berg Connectors for Circuit Boards

makerbazar.in

Pin headers consist of metal pins arranged in one or more rows. They are commonly mounted on printed circuit boards (PCBs).

They can be used with female headers, jumper wires, and compatible sockets.

Applications:

  • Arduino boards
  • ESP32 development boards
  • Sensor modules
  • Prototyping circuits
  • Expansion boards

Pin headers make it easy to connect and disconnect modules during development.

C. Dupont Connectors

Dupont Cable 10CM Male to Male + Male to Female an... – Vicedeal

au.vicedeal.com

Dupont connectors are commonly used on jumper wires in electronic prototyping. They are available in male and female configurations.

Common arrangements include:

  • Male-to-male
  • Male-to-female
  • Female-to-female

Applications: Connecting breadboards, development boards, sensors, and modules.

Their compatibility depends on the pin size, spacing, and connector housing.

D. JST Connectors

Venda 10 Pcs DIY Mini conector macho fêmea JST PH2.0mm 2PIN / 3PIN / 4PIN / 5PIN / 6PIN 10CM - Banggood Brasil

br.banggood.com

JST is a connector manufacturer's name associated with many families of compact connectors. These connectors are widely used for power and signal connections in electronic equipment.

Different JST families have different pitches, locking features, and current ratings.

Applications:

  • Battery connections
  • Sensor modules
  • Small motors
  • LED strips
  • Compact electronic devices

Important: Not every small white two-pin connector is compatible with every other one. Check the exact connector series and dimensions.

E. Terminal Block Connectors

Green PCB Terminal Block Connectors 5.08mm Pitch 2 3 4 5 6 7 8 PIN Plug-in Screw | eBay

ebay.com

Terminal blocks provide a convenient way to attach wires to a circuit, commonly using screws or spring clamps.

Applications:

  • Power supplies
  • Industrial control panels
  • Relay modules
  • Motor drivers
  • Sensor interfaces

They are especially useful when wires need to be installed or removed without soldering directly to the circuit board.

F. Audio Connectors

Audio Plug - 3.5mm - SparkFun Electronics

RCA 6 FT Audio/Video Cable Compuesto DVD/VCR/SAT Conectores Amarillo/Blanco/Rojo Directv RCA Cable 6 FT | Bodega Aurrera en línea

Hicon HI-J63SP :: 6,3mm :: Plugs :: Interconnects :: Electronic Parts :: Banzai Music GmbH

Audio connectors carry analog or digital audio signals, depending on the connector and system.

Examples include:

  • 3.5 mm audio jack: Common in headphones and audio equipment.
  • 6.35 mm audio jack: Used with instruments, mixers, and professional audio equipment.
  • RCA connector: Often used for analog audio and some video connections.

G. Coaxial Connectors

BNC Connector Coaxial Cable 180 Degree Male To SMA Straight Male With RG316 Manufacturer, Supplier, Exporter

3antelecom.com

Coaxial connectors are designed for coaxial cables, which have a central conductor surrounded by insulation and an outer conductive shield.

Examples include BNC and SMA connectors.

Applications:

  • Antennas
  • Radio-frequency (RF) equipment
  • Oscilloscopes
  • Test instruments
  • Communication systems

Correct impedance and frequency specifications are important for high-frequency signals.

H. FFC and FPC Connectors

FPC ZIF Connector Socket for 1mm Pitch FFC Flexible Flat Cable • MKTechnic

mktechnic.com

FFC stands for Flat Flexible Cable, while FPC stands for Flexible Printed Circuit.

These connectors are designed to connect flat ribbon-style cables or flexible circuit boards to PCBs. Many use a small locking mechanism.

Applications:

  • Laptop displays
  • Cameras
  • Printers
  • LCD modules
  • Compact electronic devices

The connector's pitch, contact orientation, and cable type must match.

I. Circular Connectors

1set gx16-8 pin male and female diameter 16mm wire panel connector gx16 circular aviation connector socket plug Sale - Banggood.com sold out-arrival notice-arrival notice

banggood.com

Circular connectors have round housings and may use threaded, bayonet, or push-pull locking mechanisms.

Applications:

  • Industrial machinery
  • Sensors
  • Robotics
  • Outdoor equipment
  • Communication systems

Some circular connector families are designed for demanding environments and offer specified protection against dust or moisture.

6. Types of Electrical Terminals

Terminals provide conductive connection points for wires, circuit boards, or electrical equipment.

A. Screw Terminal

Terminal block.

A screw terminal uses a screw to clamp a wire or terminal against a conductive contact.

Applications: Power supplies, control panels, relay boards, and electrical equipment.

The wire must be stripped to the correct length and secured according to the manufacturer's instructions.

B. Ring Terminal

Elliott Electronic Supply - Electronic Component Parts Supplier

elliottelectronicsupply.com

A ring terminal has a circular opening that fits over a screw or stud. It is commonly attached to a wire by crimping.

Applications:

  • Battery cables
  • Automotive wiring
  • Ground connections
  • Power distribution

A ring terminal can remain attached even if its fastening nut or screw becomes slightly loose, but it must still be tightened correctly.

C. Spade or Fork Terminal

INSULATED FORK/ SPADE TERMINALS - 精奕興業

en.yyca.com.tw

A spade terminal has a fork-shaped end that fits under a screw or terminal stud.

Applications: Control wiring, appliances, automotive circuits, and electrical panels.

Unlike a ring terminal, a fork terminal can often be removed without fully removing the screw, depending on the terminal design.

D. Bullet Terminal

Metra IBR18 14/16 and 18/22 Crimp Male and Female Bullet Terminals - 24 pieces

qualitymobilevideo.com

Bullet terminals use cylindrical male and female contacts that fit together.

Applications:

  • Automotive wiring
  • Motor connections
  • Electrical accessories
  • Detachable wire connections

They are convenient for connections that need to be disconnected during servicing.

E. Butt Splice Terminal

wish.com

A butt splice joins two wires end-to-end inside a conductive sleeve. The sleeve is usually crimped around the stripped wire ends.

Applications: Wire repair, automotive wiring, and cable extensions.

A suitable crimping tool and correctly sized terminal are essential for a reliable connection.

F. PCB Solder Terminal

Selektivlöten für THT-Bauteile - Ihlemann GmbH

ihlemann.de

A PCB solder terminal is a conductive pad, hole, or metal contact intended to be joined to a wire or component using solder.

Applications:

  • Electronic prototypes
  • Sensor boards
  • Power connections
  • Custom circuit boards

The current capacity depends on the pad size, copper thickness, wire, solder joint, and thermal conditions.

G. Battery Terminals

2PACK Car Battery Terminal Clamp Connectors Positive Negative Release Disconnect | eBay

ebay.com

Battery terminals connect electrical cables to a battery's positive and negative posts or designated contacts.

Applications:

  • Cars and motorcycles
  • Backup power systems
  • Solar energy storage
  • Battery-powered equipment

Battery connections must be secure and correctly polarized. Shorting a high-current battery can cause burns, fire, or equipment damage.

7. Male and Female Connectors

Connectors are often classified as male or female according to the shape of their mating contacts.

Connector Kits | Kits | DigiKey

Yueser 50 Pairs JST 2-Pin Connector Plug Male and Female Connector Plug with 15 cm Cable Wire for LED Light Strip - BigaMart

5/10Pair RC Bullet Connector 2/3/3.5/4.0/5/5.5/6/8mm Male Female Banana Plug | eBay

6

FeatureMale connectorFemale connector
Typical contact shapeExposed pin or plug contactSocket or receptacle contact
FunctionMates with a compatible female connectorReceives a compatible male connector
ExampleMale pin headerFemale pin header

The terms describe the mating interface, not whether a component supplies or receives power. Always check the connector family and pin arrangement before connecting it.

8. Through-Hole and Surface-Mount Connections

A. Through-Hole Connections

Through-hole components have leads or pins that pass through holes in a PCB. The connections are normally soldered on the opposite side or plated through the board.

Advantages:

  • Often mechanically strong
  • Convenient for many prototypes
  • Suitable for some larger components

B. Surface-Mount Connections

Surface-mount components are attached directly to conductive pads on the PCB surface.

Advantages:

  • Compact design
  • Efficient automated assembly
  • Suitable for high-density circuit boards

Many modern connectors use surface-mount contacts, through-hole mounting tabs, or a combination of both.

9. Connector Pitch and Pin Count

Two important connector specifications are pitch and pin count.

A. Pitch

Pitch is the distance between the centers of adjacent contacts, usually measured in millimeters.

For example, a connector with a pitch of 2.54 mm has 2.54 mm between neighboring contact centers.

A connector with the wrong pitch may not fit a header or cable correctly.

B. Pin Count

Pin count is the number of electrical contacts in the connector.

For example:

  • A 2-pin connector may provide positive and negative power connections.
  • A 3-pin connector may carry power, ground, and a signal.
  • A 4-pin connector may carry multiple signals or power and data connections.

These are common arrangements, not universal rules. The actual pinout must be checked in the device documentation.

10. Important Connector Specifications

SpecificationMeaning
Rated currentMaximum permitted current under specified conditions
Rated voltageMaximum permitted operating voltage
Contact resistanceResistance at the mating electrical contacts
PitchDistance between adjacent contact centers
Pin countNumber of contacts
Wire gaugeWire thickness specification compatible with the connector
Temperature ratingPermitted operating temperature range
Mating cyclesNumber of connection and disconnection cycles the connector is designed to withstand
IP ratingSpecified protection against ingress of dust and water, where applicable
Locking mechanismFeature that prevents accidental disconnection

A connector's current rating may depend on the number of contacts carrying current, the wire size, ambient temperature, and ventilation.

11. Connectors vs. Soldering

Connectors and soldering are two different ways to establish electrical connections.

FeatureConnectorsSoldered connections
Connection methodMating contacts, clamps, screws, or locking mechanismsMolten solder joins conductive surfaces
DisconnectionOften possible without tools, depending on the connectorUsually requires desoldering
ReuseMany connector types can be reusedDepends on the component and solder joint
Mechanical reliabilityDepends on locking, crimping, and contact designDepends on solder quality and mechanical support
Typical useRemovable modules, cables, and serviceable equipmentPermanent PCB and wire connections

Connectors are often preferred when equipment needs to be assembled, serviced, or replaced easily. Soldering is common for permanent electrical joints and component attachment.

12. Common Connection Problems

A. Loose Connections

A loose terminal may interrupt current intermittently or create resistance and heating.

Prevention: Use the correct terminal, wire size, crimping tool, and tightening method.

B. Corrosion

Moisture and contaminants can corrode metal contacts, increasing resistance and reducing reliability.

Prevention: Use connectors suitable for the environment and maintain appropriate sealing where required.

C. Incorrect Polarity

Reversing positive and negative connections can damage sensitive electronic components.

Prevention: Check the connector pinout and polarity markings before applying power.

D. Bent or Damaged Pins

Bent contacts may fail to connect or may short adjacent terminals.

Prevention: Align connectors carefully and avoid forcing incompatible parts together.

E. Incorrect Connector Type

Connectors that look similar may have different pitch, pinout, voltage ratings, or locking mechanisms.

Prevention: Verify the exact connector series and datasheet rather than relying on appearance alone.

13. Applications of Connectors and Terminals

Connectors and terminals are essential in many fields.

  • Arduino and ESP32 projects: Connecting sensors, displays, relay modules, and power supplies.
  • Computers: Connecting USB devices, displays, storage devices, and internal components.
  • Automobiles: Connecting batteries, lighting systems, sensors, and control modules.
  • Industrial automation: Connecting motors, actuators, sensors, and control panels.
  • Power systems: Connecting batteries, power supplies, and distribution wiring.
  • Communication systems: Connecting antennas, network cables, and communication equipment.
  • Consumer electronics: Connecting speakers, buttons, displays, and internal circuit boards.
  • Robotics: Connecting motors, encoders, controllers, and sensors.

14. Safety Precautions

  • Select connectors and terminals rated for the circuit's voltage and current.
  • Disconnect power before installing or removing connections.
  • Confirm polarity before connecting batteries or DC power supplies.
  • Use the correct wire gauge and crimping tool.
  • Avoid exposed conductive parts that could touch each other unintentionally.
  • Use connectors with appropriate environmental protection in wet, dusty, or outdoor applications.
  • For mains-voltage or high-current connections, use properly rated equipment and qualified installation practices.

In summary: Connectors and terminals provide reliable electrical paths between wires, circuit boards, and electronic devices. Understanding connector types, pinouts, contact ratings, wire sizes, and connection methods helps prevent loose connections, overheating, and circuit damage.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy