ESP32 — ESP32 Board and Variants
After understanding what ESP32 is, the next important topic is understanding ESP32 boards and variants.
A common beginner mistake is thinking that there is only one ESP32 board. Actually, ESP32 is a family of chips, and many different development boards are built around those chips.
1. ESP32 Chip vs ESP32 Development Board
First, understand the difference.
ESP32 chip
The chip is the actual microcontroller.
For example:
┌──────────────────┐ │ ESP32 │ │ CHIP │ │ │ │ CPU │ │ Wi-Fi │ │ Bluetooth │ │ GPIO │ │ ADC │ │ Timers │ └──────────────────┘
Development board
A development board puts the ESP32 chip together with other components so that it is easier to use.
USB Connector │ USB-to-Serial │ ┌──────────────┐ │ ESP32 │ │ CHIP │ └──────────────┘ │ │ │ │ │ GPIO Pins
A development board commonly includes:
- ESP32 chip/module
- USB connector
- USB-to-serial interface
- Voltage regulator
- Boot circuitry
- Reset/EN button
- GPIO headers
- Power pins
- Status LED
So when you buy an ESP32 DevKit, you are usually buying a development board containing an ESP32 module/chip.
2. ESP32 Family
ESP32 is not just one chip.
Espressif has produced several generations and variants.
Some important families include:
ESP32 ├── ESP32 ├── ESP32-S2 ├── ESP32-S3 ├── ESP32-C3 ├── ESP32-C6 └── ESP32-H2
They have different capabilities and are designed for different applications.
For example:
| Family | Main Characteristics |
|---|---|
| ESP32 | Original, Wi-Fi + Bluetooth |
| ESP32-S2 | Wi-Fi, USB, no Bluetooth |
| ESP32-S3 | Wi-Fi + BLE, AI/ML-oriented features |
| ESP32-C3 | RISC-V, Wi-Fi + BLE, low-cost |
| ESP32-C6 | Wi-Fi 6 + BLE + 802.15.4 |
| ESP32-H2 | BLE + 802.15.4, no Wi-Fi |
The exact features depend on the specific chip and board.
3. Original ESP32
The original ESP32 is the one many beginners encounter first.
A typical ESP32 development board looks conceptually like:
┌─────────────────────────┐ │ ESP32 DEVKIT │ │ │ USB → │ [USB] │ │ │ │ ┌─────────┐ │ │ │ ESP32 │ │ │ │ Module │ │ │ └─────────┘ │ │ │ │ GPIO GPIO GPIO GPIO │ └─────────────────────────┘
It is popular because it provides:
- Wi-Fi
- Bluetooth Classic
- BLE
- GPIO
- ADC
- PWM
- SPI
- I²C
- UART
- Timers
- Touch sensing on supported variants
- Other peripherals
This makes it suitable for general IoT and electronics projects.
4. ESP32-WROOM
You will often see names such as:
ESP32-WROOM-32
This is an ESP32 module, not necessarily the complete development board.
The module contains the ESP32 chip and supporting components such as flash memory and RF components.
Conceptually:
ESP32 Development Board │ ↓ ┌───────────────┐ │ ESP32-WROOM │ │ Module │ └───────────────┘ │ ↓ ESP32 Chip
Many popular ESP32 development boards use an ESP32-WROOM module.
5. ESP32 DevKit
One of the most common boards for beginners is an ESP32 DevKit.
Different manufacturers produce boards with names such as:
- ESP32 DevKit
- ESP32 DevKit V1
- ESP32-DevKitC
- ESP32 development board
However, the exact pin arrangement can vary between boards.
This is very important.
Don't assume that every board labeled "ESP32" has exactly the same pins.
Always check the board's:
- Pinout
- ESP32 variant
- Module name
- GPIO availability
- Power pins
6. ESP32-S2
The ESP32-S2 is another member of the ESP32 family.
Important characteristics include:
- Wi-Fi
- USB support
- GPIO
- ADC
- PWM
- Various communication peripherals
However, unlike the original ESP32, ESP32-S2 does not have Bluetooth.
So:
ESP32 ├── Wi-Fi ✅ └── Bluetooth ✅ ESP32-S2 ├── Wi-Fi ✅ └── Bluetooth ❌
ESP32-S2 can therefore be useful when Wi-Fi and USB features are more important than Bluetooth.
7. ESP32-S3
The ESP32-S3 is a more advanced member of the family.
It is designed for applications including:
- IoT
- AI/ML workloads
- Voice interfaces
- Computer vision
- USB applications
- Smart devices
It supports:
- Wi-Fi
- Bluetooth Low Energy
- USB
- More advanced processing capabilities than the original ESP32
Some ESP32-S3 boards also provide additional memory and peripherals for more demanding projects.
For example:
ESP32-S3 │ ├── Wi-Fi ├── BLE ├── USB ├── GPIO ├── Camera ├── Display └── AI/ML applications
8. ESP32-C3
The ESP32-C3 is particularly interesting because it uses a RISC-V processor architecture.
It is designed to provide a compact and cost-effective solution for IoT devices.
Typical capabilities include:
- Wi-Fi
- Bluetooth LE
- GPIO
- ADC
- PWM
- SPI
- I²C
- UART
A simplified view:
ESP32-C3 │ ├── RISC-V CPU ├── Wi-Fi ├── BLE ├── GPIO └── IoT peripherals
It is often found in small IoT boards.
9. ESP32-C6
The ESP32-C6 is a newer generation designed for modern wireless IoT applications.
One of its important features is support for:
Wi-Fi 6
It also supports:
- Bluetooth LE
- IEEE 802.15.4
- Zigbee/Thread-related applications
- GPIO
- Other peripherals
Conceptually:
ESP32-C6 │ ├── Wi-Fi 6 ├── Bluetooth LE ├── 802.15.4 │ ├── Thread │ └── Zigbee └── IoT peripherals
This makes it particularly interesting for modern smart-home and connected-device ecosystems.
10. ESP32-H2
The ESP32-H2 focuses on low-power wireless connectivity.
It supports technologies such as:
- Bluetooth LE
- IEEE 802.15.4
It does not provide Wi-Fi.
So:
ESP32-H2 │ ├── Bluetooth LE ✅ ├── 802.15.4 ✅ └── Wi-Fi ❌
It can be useful for low-power connected devices and technologies such as Thread and Zigbee.
11. ESP32-CAM
Another popular board is ESP32-CAM.
As the name suggests, it combines an ESP32-based system with a camera.
A typical concept is:
ESP32-CAM ┌──────────┐ Camera │ Camera │ ───→ │ ESP32 │ ───→ Wi-Fi │ │ └──────────┘
It can be used for:
- Camera streaming
- Web-controlled cameras
- Security systems
- Motion detection
- Image-based projects
- IoT camera projects
Some ESP32-CAM boards also include a microSD card interface.
12. ESP32 with Different Board Designs
The same ESP32 family can appear on many different physical boards.
For example:
ESP32 Family │ ┌─────────────┼─────────────┐ ↓ ↓ ↓ Dev Board ESP32-CAM IoT Board │ │ │ GPIO Camera Sensors USB SD Card Display Buttons Relay
The ESP32 chip may be similar, but the board design can be very different.
13. How to Identify Your ESP32 Board
When you have an ESP32 in your hand, don't immediately start connecting wires.
First identify the board.
Look for:
1. Board name
For example:
ESP32 DEVKIT ESP32 DEVKIT V1 ESP32-S3 ESP32-C3 ESP32-CAM
2. Module marking
You might see:
ESP32-WROOM-32
or another module name.
3. USB connector
Common types include:
- Micro USB
- USB-C
4. Pin labels
Look around the board:
3V3 GND GPIO TX RX EN BOOT VIN
5. Chip/module markings
These help determine exactly which ESP32 variant you have.
14. Why Board Identification Is Important
Suppose someone gives you code:
#define SENSOR_PIN 34
You cannot blindly assume GPIO 34 exists on every ESP32-family board.
Different variants have different:
- GPIO counts
- GPIO functions
- ADC capabilities
- USB capabilities
- communication peripherals
- boot restrictions
- power characteristics
Therefore:
Always check the exact board and pinout before wiring hardware.
15. ESP32 Logic Voltage
This is especially important when working with sensors and modules.
Most modern ESP32 GPIO logic operates at approximately:
3.3 V
That means you should be careful when connecting external devices that output 5 V logic.
For example:
ESP32 GPIO │ │ 3.3 V logic ↓ Sensor
You should not assume that a 5 V signal is safe for every ESP32 GPIO.
This is one reason understanding the specific board's electrical specifications is important.
16. ESP32 Power Pins
You will commonly encounter pins such as:
3V3 GND VIN / 5V
3V3
Provides approximately 3.3 V on boards that expose this regulated rail.
GND
Ground/reference connection.
VIN / 5V
The exact behavior depends on the particular development board.
Some boards expose the USB 5 V rail or provide an input path intended for external power.
Do not assume VIN means "connect any voltage."
Always check your board's documentation.
17. Board Selection for Projects
Different projects may benefit from different boards.
| Project | Suitable ESP32 Type |
|---|---|
| Basic LED/sensor learning | ESP32 DevKit |
| Wi-Fi IoT | ESP32 DevKit / C3 / S3 |
| Bluetooth/BLE | Original ESP32 / C3 / S3 |
| Camera | ESP32-CAM / suitable S3 camera board |
| USB projects | ESP32-S2 / S3 |
| Modern wireless IoT | ESP32-C6 |
| Low-power 802.15.4/BLE | ESP32-H2 |
| General robotics | ESP32 DevKit |
| Smart home | ESP32 / C3 / C6 / S3 depending on requirements |
The "best" ESP32 is therefore determined by the project, not simply by choosing the newest model.
18. Simple Comparison
A beginner-friendly way to remember the major families:
Original ESP32 ↓ General-purpose + Wi-Fi + Bluetooth ESP32-S2 ↓ Wi-Fi + USB ESP32-S3 ↓ Wi-Fi + BLE + USB + advanced applications ESP32-C3 ↓ RISC-V + Wi-Fi + BLE + compact IoT ESP32-C6 ↓ Wi-Fi 6 + BLE + 802.15.4 ESP32-H2 ↓ BLE + 802.15.4
19. Most Important Concept
Don't memorize every ESP32 model immediately.
First understand this hierarchy:
ESP32 │ ├── ESP32 Family │ │ │ ├── ESP32 │ ├── ESP32-S2 │ ├── ESP32-S3 │ ├── ESP32-C3 │ ├── ESP32-C6 │ └── ESP32-H2 │ └── Development Boards │ ├── DevKit ├── ESP32-CAM ├── ESP32-S3 boards ├── ESP32-C3 boards └── Many manufacturer-specific boards
In one sentence:
ESP32 is a family of microcontrollers, while an ESP32 development board is a ready-to-use hardware board built around one of those chips or modules.
What you should remember from this topic
- ESP32 is a family, not just one board.
- Chip ≠ development board.
- ESP32-WROOM is a module commonly used on development boards.
- Different ESP32 variants have different features and pinouts.
- Original ESP32 provides Wi-Fi and Bluetooth.
- ESP32-S2 has Wi-Fi but no Bluetooth.
- ESP32-S3 adds advanced capabilities and USB.
- ESP32-C3 uses a RISC-V CPU.
- ESP32-C6 adds Wi-Fi 6 and 802.15.4.
- ESP32-H2 focuses on BLE and 802.15.4, without Wi-Fi.
- ESP32-CAM is useful for camera projects.
- Always check the exact board's pinout and voltage specifications before wiring.