Ugenz Academy/IoT Tutorial

Esp Now And Mesh Networking

8 min read1,544 words

Reading progress

Keep learning

ESP-NOW and Mesh Networking

After Wi-Fi, the next important ESP32 wireless concept is ESP-NOW and mesh networking.

These are useful when you have multiple ESP32 boards that need to communicate with each other.

For example:

ESP32 #1 ESP32 #2 Sensor Display │ ▲ │ │ └────── ESP-NOW ──────┘

No traditional router is required for basic ESP-NOW communication.


1. What is ESP-NOW?

ESP-NOW is a wireless communication protocol developed for Espressif devices.

It allows devices to exchange small amounts of data directly.

ESP32 A │ │ ESP-NOW │ ▼ ESP32 B

Compared with normal Wi-Fi:

Normal Wi-Fi: ESP32 → Router → ESP32

ESP-NOW can be:

ESP-NOW: ESP32 → ESP32

2. Why Use ESP-NOW?

ESP-NOW is useful when you need:

  • Fast device-to-device communication
  • Low overhead
  • Low power
  • No traditional Wi-Fi router
  • Remote sensors
  • Wireless buttons
  • Robotics
  • Smart agriculture
  • Home automation

For example:

Wireless Button │ ESP-NOW │ ▼ ESP32 │ ▼ Relay

Press the button and the remote ESP32 can turn on a light.


3. ESP-NOW vs Wi-Fi

FeatureNormal Wi-FiESP-NOW
Router requiredUsually❌ Not for basic peer communication
InternetCan use❌ Not inherently
Device-to-deviceYesYes
SetupMore networkingLightweight
IoT sensorsGoodExcellent
Web serverExcellentNot its purpose
CloudYesNot directly
Low-power applicationsPossibleVery useful

Think:

Wi-Fi → Network + Internet ESP-NOW → Device-to-device communication

4. ESP-NOW Architecture

A simple system:

ESP32 TRANSMITTER │ │ ESP-NOW │ ▼ ESP32 RECEIVER │ ┌──────┼──────┐ │ │ │ LED Relay Motor

The transmitter sends a packet.

Example:

LED = ON

Receiver receives it and performs the action.


5. MAC Address

ESP-NOW commonly identifies peers using their MAC addresses.

A MAC address looks like:

24:6F:28:AB:CD:EF

You can think of it as a hardware/network identifier.

ESP32 A MAC: AA:BB:CC:11:22:33 ESP32 B MAC: AA:BB:CC:44:55:66

Then A can communicate with B.


6. Find ESP32 MAC Address

Example:

#include <WiFi.h> void setup() { Serial.begin(115200); WiFi.mode(WIFI_STA); Serial.print("MAC Address: "); Serial.println(WiFi.macAddress()); } void loop() { }

Serial Monitor might show:

MAC Address: 24:6F:28:AB:CD:EF

You can use this address when configuring ESP-NOW peers.


7. Basic ESP-NOW Concept

Imagine two boards:

ESP32 #1 TRANSMITTER │ │ │ "LED ON" ▼ ESP32 #2 RECEIVER │ ▼ LED

The transmitter sends data.

The receiver processes it.


8. Sending Structured Data

You don't have to send only strings.

You can create a structure:

typedef struct { int temperature; int humidity; bool motion; } SensorData;

Then send:

Temperature = 29 Humidity = 65 Motion = true

Conceptually:

ESP32 │ └── SensorData ├── temperature ├── humidity └── motion │ ESP-NOW │ ▼ ESP32

This is extremely useful for IoT.


9. Example IoT System

Imagine you have two ESP32 boards.

ESP32 #1

Connected to:

DHT22 PIR

ESP32 #2

Connected to:

LCD Relay Buzzer

Architecture:

DHT22 ──┐ │ PIR ────┤ ▼ ESP32 #1 │ ESP-NOW │ ▼ ESP32 #2 / | \ / | \ LCD Relay Buzzer

ESP32 #1 can send:

Temperature: 28°C Humidity: 64% Motion: YES

ESP32 #2 displays and acts on the information.


10. ESP-NOW Callback

ESP-NOW communication is event-based.

When a packet arrives, a callback function can be triggered.

Conceptually:

void onDataReceived(...) { // Process received data }

This means you don't necessarily need to continuously poll for data.


11. Important ESP-NOW Concept: Peer

A peer is another device that your ESP32 communicates with.

Example:

ESP32 A │ ├── Peer B ├── Peer C └── Peer D

One ESP32 can communicate with multiple ESP32 devices, subject to ESP-NOW/platform limitations.


12. One-to-One

The simplest topology:

ESP32 A │ │ ▼ ESP32 B

Example:

Remote Button → ESP32 → Relay

13. One-to-Many

One ESP32 can act as a transmitter for several devices.

ESP32 A │ ┌─────────┼─────────┐ │ │ │ ▼ ▼ ▼ ESP32 B ESP32 C ESP32 D

Example:

Central Controller │ ├── Room 1 ├── Room 2 └── Room 3

14. Many-to-One

Several sensor ESP32s can send data to one central ESP32.

ESP32 Sensor 1 ──┐ ESP32 Sensor 2 ──┤ ESP32 Sensor 3 ──┼──→ Central ESP32 ESP32 Sensor 4 ──┘

For smart farming:

Central ESP32 ▲ ┌─────────┼─────────┐ │ │ │ Soil 1 Soil 2 Soil 3 ESP32 ESP32 ESP32

15. What is Mesh Networking?

Now we move to a different concept.

In a mesh network, devices can communicate through other devices.

Example:

ESP32 A │ ▼ ESP32 B │ ▼ ESP32 C │ ▼ ESP32 D

If A cannot directly reach D, B and C can potentially help relay communication depending on the mesh implementation.


16. Why Mesh?

Imagine a large farm:

Farm ───────────────────────────── Sensor A Sensor B \ / \ / ESP32 C │ ESP32 D │ Main Controller

A single wireless link may not cover the entire area.

Mesh can extend communication through multiple nodes.


17. Normal Wi-Fi vs Mesh

Normal network

Router / | \ / | \ A B C

All devices communicate through the router.

Mesh

A ─── B ─── C │ │ D ─────┘

Devices can communicate through multiple paths.


18. ESP-NOW vs Mesh

Don't confuse these two.

ESP-NOW

Primarily:

Device ↔ Device

Fast, lightweight wireless communication.

Mesh

Primarily:

Device ↕ Device ↕ Device ↕ Device

A network architecture where nodes can relay/route information.

ESP-NOW can be used as a building block in some custom multi-node systems, but ESP-NOW itself is not automatically a full mesh routing protocol.


19. Example: Wireless Remote Car

This is especially useful for robotics.

Remote ESP32 Controller │ ESP-NOW │ ▼ Car ESP32 / \ / \ L298N Motors

Remote commands:

F → Forward B → Backward L → Left R → Right S → Stop

The car does not need your home Wi-Fi router.


20. Example: Smart Agriculture

Imagine 5 sensor nodes:

Main ESP32 Controller ▲ ┌──────────┼──────────┐ │ │ │ ▲ ▲ ▲ Node 1 Node 2 Node 3 Soil Soil DHT22

Data:

Node 1: Soil = 35% Node 2: Soil = 42% Node 3: Temperature = 31°C Humidity = 58%

Central ESP32 can decide:

Soil < 30% ↓ Pump ON

21. ESP-NOW + Wi-Fi

One powerful architecture is:

Sensors │ │ ESP-NOW ▼ Gateway ESP32 │ │ Wi-Fi ▼ Internet │ ▼ Cloud

This is very useful for IoT.

For example:

Soil Sensor ESP32 │ │ ESP-NOW ▼ Gateway ESP32 │ │ Wi-Fi ▼ Firebase / MQTT / Server

The sensor nodes don't each need an Internet connection.


22. Practical Project

Wireless Home Sensor

ESP32 #1:

PIR DHT22 LDR

ESP32 #2:

LCD Relay Buzzer

Communication:

┌───────────────┐ │ ESP32 #1 │ │ │ │ PIR │ │ DHT22 │ │ LDR │ └───────┬───────┘ │ ESP-NOW │ ▼ ┌───────────────┐ │ ESP32 #2 │ │ │ │ LCD │ │ Relay │ │ Buzzer │ └───────────────┘

This is a very good practical ESP32 project.


23. Advantages of ESP-NOW

✅ No normal router required
✅ Fast communication
✅ Low overhead
✅ Useful for battery-powered nodes
✅ Good for remote controls
✅ Good for sensors
✅ Good for robotics
✅ Multiple ESP32 devices can communicate


24. Limitations

ESP-NOW isn't a replacement for Wi-Fi in every project.

❌ Not designed for normal web browsing
❌ Doesn't inherently provide Internet access
❌ Small packet-oriented communication
❌ Peer management is required
❌ Range depends on hardware/environment
❌ Mesh routing isn't automatically provided


25. Common Mistakes

❌ Wrong MAC address

If the receiver's MAC is incorrect, communication won't work.


❌ Wi-Fi mode problems

ESP-NOW operates through the ESP32's Wi-Fi radio, so Wi-Fi configuration/channel considerations matter.


❌ Different Wi-Fi channels

When combining ESP-NOW with a Wi-Fi network, channel configuration becomes important.


❌ Forgetting callbacks

ESP-NOW applications commonly use callbacks for send/receive events.


❌ Sending incompatible data

Both devices should agree on the data structure.

For example:

Sender: temperature humidity motion

Receiver should interpret those fields in the same order/type.


🧠 Quick Summary

ESP-NOW │ ├── Direct ESP32 communication ├── No normal router required ├── Fast ├── Lightweight ├── Low power └── Excellent for IoT

Mesh:

ESP32 A │ ▼ ESP32 B │ ▼ ESP32 C │ ▼ ESP32 D

And a powerful IoT architecture is:

Sensor ESP32 │ ESP-NOW │ ▼ Gateway ESP32 │ Wi-Fi │ ▼ Cloud / Internet

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy