Ugenz Academy/IoT Tutorial

Radio Frequency

8 min read1,443 words

Reading progress

Keep learning

Radio Frequency (RF) in Electronics

1. Introduction

Radio frequency (RF) refers to the range of electromagnetic signal frequencies commonly used for wireless communication, broadcasting, radar, and other electronic applications.

RF technology allows devices to transmit and receive information without a direct physical connection. It is used in radio receivers, television broadcasting, mobile phones, Wi-Fi routers, Bluetooth devices, RFID systems, and IoT projects.

For example, an ESP32 uses radio-frequency signals to communicate with a Wi-Fi router or a Bluetooth device.

R&S SMBV100A矢量信號發生器 | 創得企業有限公司

RF module working principle: from transmission to reception – Ebyte Official Store - IoT Module Manufacturer

ESP32 WROOM External Antennae

7

2. Definition of Radio Frequency

Radio frequency is the frequency of an alternating electrical signal or electromagnetic wave in the radio-frequency portion of the electromagnetic spectrum.

The RF range is commonly described as approximately 3 kHz to 300 GHz, although terminology and boundaries can vary by technical context.

RF signals can carry information such as voice, audio, video, sensor readings, and digital data.

Examples of RF applications include:

  • AM and FM radio broadcasting.
  • Television broadcasting.
  • Mobile communication.
  • Wi-Fi and Bluetooth.
  • Satellite communication.
  • Radar systems.
  • RFID and wireless sensors.

3. How Does Radio Frequency Work?

Radio-frequency communication typically involves a transmitter, an antenna, a propagation path, a receiving antenna, and a receiver.

1. Information source

Voice, video, or digital data

2. RF transmitter

Generates and modulates the RF signal

3. Transmitting antenna

Converts electrical energy into radiated waves

RF waves travel through the surrounding environment

4. Receiving antenna and RF receiver

Detects and processes the incoming signal

5. Recovered information

Audio, video, or digital data

For example, when sending a sensor reading over Wi-Fi, the device encodes the data into a radio signal. The receiving device detects and decodes that signal to recover the information.

4. Radio-Frequency Bands

The RF spectrum is divided into bands according to frequency.

BandFrequency rangeCommon applications
VLF — Very Low Frequency3–30 kHzSpecialized navigation and communication
LF — Low Frequency30–300 kHzNavigation and time signals
MF — Medium Frequency300 kHz–3 MHzAM broadcasting
HF — High Frequency3–30 MHzShortwave radio and long-distance communication
VHF — Very High Frequency30–300 MHzFM radio and some television services
UHF — Ultra High Frequency300 MHz–3 GHzTelevision, cellular systems, and many wireless devices
SHF — Super High Frequency3–30 GHzRadar, satellite links, and some Wi-Fi bands
EHF — Extremely High Frequency30–300 GHzMillimetre-wave communication and specialized radar

These are standard broad band classifications. Actual service allocations vary by country and regulator.

5. Frequency, Wavelength, and RF Signals

Frequency and wavelength are related by the speed of propagation.

c=fλc=f\lambda

Therefore:

λ=cf\lambda=\frac{c}{f}

Where:

  • cc = speed of light in a vacuum, approximately 3×108 m/s3\times10^8\text{ m/s}
  • ff = frequency in hertz (Hz)
  • λ\lambda = wavelength in metres (m)

Example

Calculate the free-space wavelength of a 100 MHz RF signal.

Given:

f=100×106 Hzf=100\times10^6\text{ Hz} λ=3×108100×106\lambda=\frac{3\times10^8}{100\times10^6} λ=3 m\boxed{\lambda=3\text{ m}}

The wavelength is approximately 3 metres.

As frequency increases, wavelength decreases for the same propagation medium.

6. Common RF Frequencies in Everyday Electronics

Frequency or bandCommon use
125 kHzSome low-frequency RFID systems
13.56 MHzNFC and high-frequency RFID
433 MHzSome remote-control and sensor devices, where permitted
868 MHzCertain European ISM-band applications
915 MHzCertain regional ISM-band applications
2.4 GHzWi-Fi, Bluetooth, and many wireless IoT devices
5 GHzWi-Fi and other radio services
6 GHzWi-Fi and other services in permitted regional allocations
GNSS frequency bandsSatellite navigation reception

The availability and permitted use of specific frequencies depend on regional regulations. Devices must comply with the applicable requirements for the country where they operate.

7. Important RF Components

SMA Cable Assemblies | Amphenol RF

Ghz Power Amplifier Indiana RF Amplifiers & Microwave Amplifiers for sale - eBay

Band-Pass Filter BPF 7th Order 80-1100Mhz 433MHz 868MHz 915MHz 1GHz for RF Units | eBay

7

RF systems use several specialized components.

ComponentFunction
AntennaTransmits or receives electromagnetic waves
RF oscillatorGenerates a signal at a particular frequency
RF amplifierIncreases signal power or voltage
RF filterPasses selected frequencies and attenuates others
MixerCombines signals to produce sum and difference frequencies
ModulatorEncodes information onto a carrier
DemodulatorRecovers information from a modulated signal
Coaxial cableCarries RF signals between components
RF connectorProvides a suitable connection between RF components
Matching networkHelps match impedances and transfer power efficiently

8. Modulation in RF Communication

Modulation is the process of changing a property of a carrier signal according to the information being transmitted.

Common modulation methods include:

  • Amplitude Modulation (AM): Information changes the amplitude of the carrier.
  • Frequency Modulation (FM): Information changes the instantaneous frequency of the carrier.
  • Amplitude Shift Keying (ASK): Digital information is represented by changes in carrier amplitude.
  • Frequency Shift Keying (FSK): Digital information is represented by changes in carrier frequency.
  • Phase Shift Keying (PSK): Digital information is represented by changes in carrier phase.
  • Quadrature Amplitude Modulation (QAM): Information is represented through combinations of amplitude and phase.

AM and FM are widely associated with traditional radio broadcasting. Modern digital communication systems use methods such as PSK and QAM, often combined with other techniques.

9. RF Power and Signal Strength

RF power describes the rate at which a radio-frequency system transfers energy.

Power is commonly expressed in watts (W), milliwatts (mW), or decibels relative to one milliwatt (dBm).

The conversion from milliwatts to dBm is:

P_dBm=10log⁡_10(P_mW)P\_{\text{dBm}}=10\log\_{10}(P\_{\text{mW}})

Example

Convert 100 mW into dBm.

P_dBm=10log⁡_10(100)P\_{\text{dBm}}=10\log\_{10}(100) P_dBm=20 dBm\boxed{P\_{\text{dBm}}=20\text{ dBm}}

Higher RF power does not always guarantee better communication. Antenna gain, receiver sensitivity, obstacles, interference, and permitted transmission limits also matter.

10. Applications of Radio Frequency

RF technology is used in many areas of electronics.

  1. Radio broadcasting: Transmits audio programs.
  2. Television: Carries broadcast video and audio.
  3. Mobile networks: Supports wireless voice and data.
  4. Wi-Fi: Connects computers, smartphones, and network devices.
  5. Bluetooth: Enables short-range wireless communication.
  6. RFID: Identifies objects using radio-frequency tags.
  7. Radar: Detects objects and measures distance or speed.
  8. Satellite communication: Transfers information between satellites and ground stations.
  9. IoT: Connects wireless sensors, microcontrollers, and gateways.
  10. Remote controls: Operates compatible devices wirelessly.

11. Advantages of RF Technology

  • Enables wireless communication without physical cables.
  • Supports communication over a wide range of distances.
  • Can carry voice, video, and digital information.
  • Supports portable and mobile devices.
  • Allows many applications to use different frequency bands.
  • Enables wireless monitoring and automation in IoT systems.

12. Limitations of RF Technology

  • Signals may weaken over distance.
  • Walls and other objects can attenuate or block signals.
  • Interference can reduce communication reliability.
  • RF circuits and antennas may require careful design and tuning.
  • High-frequency systems can be sensitive to PCB layout and component placement.
  • Spectrum availability and transmission power are regulated.

13. Safety and Precautions

  • Follow local regulations for RF frequency use and transmission power.
  • Use antennas and RF components designed for the intended frequency band.
  • Avoid touching exposed high-power RF connections during operation.
  • Maintain appropriate separation from high-power transmitting antennas.
  • Use suitable RF shielding and testing procedures where required.
  • Follow manufacturer instructions when working with RF amplifiers and transmitters.

Ordinary Wi-Fi and Bluetooth signals are non-ionizing radio-frequency radiation. RF exposure nevertheless needs to remain within applicable safety limits.

14. Summary

Radio frequency is the part of the electromagnetic spectrum commonly used for radio communication and wireless electronics. RF systems use transmitters, antennas, receivers, filters, amplifiers, and modulation techniques to transfer information.

RF technology powers radio broadcasting, mobile networks, Wi-Fi, Bluetooth, RFID, radar, satellite communication, and IoT devices.

Key point: RF technology enables electronic devices to transmit and receive information wirelessly using electromagnetic waves at selected frequencies.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy