Ugenz Academy/IoT Tutorial

Antenna Fundamentals

9 min read1,660 words

Reading progress

Keep learning

Antenna Fundamentals in Electronics

1. Introduction

An antenna is a device that transmits or receives electromagnetic waves. It converts electrical signals into electromagnetic waves during transmission and converts incoming electromagnetic waves into electrical signals during reception.

Antennas are essential components in wireless communication systems, including radio, television, mobile phones, Wi-Fi, Bluetooth, GPS, radar, and satellite communication.

For example, an ESP32 uses an antenna to transmit and receive wireless signals when communicating over Wi-Fi or Bluetooth.

Types of Antennas: Dipole, Monopole, Patch, Yagi-Uda, Horn, Parabolic, Helical, Loop | Kumud Srivastava posted on the topic | LinkedIn

Smart Doorbell - Share Project - PCBWay

Mobile data traffic increased 34% on-year in 2020, led by 4G: CLSA, ETTelecom

8

2. Definition of an Antenna

An antenna is a conductive structure designed to radiate electromagnetic energy into space or receive electromagnetic energy from incoming waves.

Antennas work according to the principle of electromagnetic radiation and electromagnetic induction.

There are two basic operating modes:

  • Transmitting antenna: Converts an electrical signal into electromagnetic radiation.
  • Receiving antenna: Converts incoming electromagnetic radiation into an electrical signal.

Many antennas can perform both functions, depending on the connected radio circuit.

3. How Does an Antenna Work?

3.1 Transmitting Mode

When an alternating current flows through an antenna, the changing electric and magnetic fields can produce electromagnetic waves that propagate away from the antenna.

The process is:

  1. A transmitter generates a radio-frequency (RF) signal.
  2. The signal is supplied to the antenna.
  3. Alternating current flows through the antenna.
  4. The antenna radiates electromagnetic waves.
  5. The waves travel through the surrounding environment.

3.2 Receiving Mode

When electromagnetic waves reach a receiving antenna, their electric field induces a voltage and current in the antenna conductor.

The process is:

  1. Electromagnetic waves reach the antenna.
  2. The incoming field induces an electrical signal.
  3. The receiver processes and amplifies the signal as needed.
  4. The original information is recovered.

Transmitter Antenna Radio Waves at Gary Cadwell blog

exoflazkj.blob.core.windows.net

4. Important Antenna Parameters

Several parameters describe the performance of an antenna.

ParameterDescription
FrequencyThe frequency at which the antenna operates
WavelengthThe spatial length of one electromagnetic wave cycle
GainDirectional concentration of radiated or received power relative to a reference antenna
DirectivityHow strongly an antenna focuses radiation in particular directions
Radiation patternA representation of how radiation varies with direction
PolarizationThe orientation of the electric field
BandwidthThe range of frequencies over which the antenna meets specified performance requirements
ImpedanceThe electrical opposition presented by the antenna at its feed point
EfficiencyThe fraction of accepted input power converted into radiated power

These parameters help engineers select or design an antenna for a particular wireless application.

5. Frequency and Wavelength

Frequency and wavelength are two of the most important factors in antenna design.

The relationship between wave speed, frequency, and wavelength is:

c=fλc=f\lambda

Therefore:

λ=cf\lambda=\frac{c}{f}

Where:

  • cc = speed of light in a vacuum, approximately 3×108 m/s3\times10^8\text{ m/s}
  • ff = frequency in hertz (Hz)
  • λ\lambda = wavelength in metres (m)

Example

Calculate the wavelength of a 2.4 GHz Wi-Fi signal.

Given:

f=2.4×109 Hzf=2.4\times10^9\text{ Hz}

Using the formula:

λ=3×1082.4×109\lambda=\frac{3\times10^8}{2.4\times10^9} λ=0.125 m\boxed{\lambda=0.125\text{ m}}

Therefore, the wavelength is approximately 12.5 cm.

A quarter-wavelength is:

L≈λ4L\approx\frac{\lambda}{4} L≈12.54=3.125 cmL\approx\frac{12.5}{4}=3.125\text{ cm}

Thus, a quarter-wavelength at 2.4 GHz is approximately 3.1 cm in free space. The actual antenna dimensions may differ because of conductor geometry, surrounding materials, and the antenna's construction.

6. Types of Antennas

Different antenna designs are suitable for different frequencies, directions, sizes, and applications.

Your First Dipole Antenna - Ham Radio School

6.1 Dipole Antenna

A basic antenna made of two conductive elements, commonly arranged in a straight line.

Applications: Radio communication, television reception, and antenna experiments.

Antenna - Satellite Wiki

6.2 Monopole Antenna

A conductive element that commonly operates above a ground plane.

Applications: Portable radios, vehicle antennas, and wireless devices.

八木式アンテナとは?その特徴やメリット・デメリットを解説! | テレビ・地デジアンテナの格安設置工事ならさくらアンテナ(大阪、京都、兵庫、奈良、滋賀、和歌山の関西完全網羅)

6.3 Yagi-Uda Antenna

A directional antenna that uses a driven element and additional parasitic elements.

Applications: Television reception and directional radio links.

Design and performance analysis of compact Microstrip Patch Antenna (MPA) for wireless fidelity communication | Journal of Engineering and Applied Science | Springer Nature Link

6.4 Patch Antenna

A low-profile antenna constructed using conductive patches on a dielectric substrate.

Applications: GPS, wireless devices, and satellite communication.

satellite dish

6.5 Parabolic Reflector Antenna

Uses a curved reflector to concentrate or receive radio waves in a particular direction.

Applications: Satellite communication, radio astronomy, and radar.

Mercado Libre

6.6 Helical Antenna

Uses a conductor wound in a helix.

Applications: Satellite communication, telemetry, and selected portable radio systems.

7. Radiation Patterns

An antenna's radiation pattern describes how its radiation strength varies with direction.

Two common categories are:

  • Omnidirectional antenna: Provides approximately uniform radiation in a horizontal plane, although its complete three-dimensional pattern may not be uniform.
  • Directional antenna: Concentrates radiation more strongly in selected directions.

Omnidirectional antennas are useful when devices communicate in many directions. Directional antennas are useful when a signal needs to be concentrated toward a particular destination.

8. Antenna Gain and Directivity

Antenna gain describes how effectively an antenna directs power in a particular direction compared with a reference antenna, accounting for antenna efficiency.

Gain is commonly expressed in:

  • dBi: Relative to an ideal isotropic antenna.
  • dBd: Relative to a half-wave dipole antenna.

For gain values expressed in decibels under comparable conditions:

G_dBi≈G_dBd+2.15G\_{\text{dBi}}\approx G\_{\text{dBd}}+2.15

An antenna with higher gain does not automatically transmit more total power. It generally concentrates its radiation more strongly in certain directions.

Directivity describes the concentration of radiation in a direction without accounting for antenna losses, whereas gain also accounts for efficiency.

9. Antenna Polarization

Polarization describes the orientation of an electromagnetic wave's electric field.

Common types include:

  • Linear polarization: The electric field oscillates along a fixed direction, such as vertical or horizontal.
  • Circular polarization: The electric field rotates as the wave propagates, with approximately constant magnitude in an ideal circularly polarized wave.
  • Elliptical polarization: The electric field traces an ellipse.

Matching the polarization of transmitting and receiving antennas generally improves signal reception. Polarization mismatch can reduce the received signal strength.

10. Antenna Impedance and Matching

Antenna impedance describes the relationship between voltage and current at the antenna feed point.

A radio transmitter and its antenna should be appropriately matched to transfer power efficiently and reduce reflections.

Many RF systems use a nominal impedance of 50 ohms, although other impedances are used in particular systems.

An impedance mismatch can cause some transmitted power to be reflected toward the source, reducing the power delivered to the antenna and potentially affecting transmitter performance.

Matching networks may use inductors, capacitors, transmission lines, or other components.

11. Antennas in Wi-Fi, Bluetooth, and IoT

Antennas allow IoT devices to communicate wirelessly.

TechnologyCommon frequency bandsTypical antenna use
Wi-Fi2.4 GHz and, depending on the standard and region, 5 GHz or 6 GHzNetwork connectivity
Bluetooth2.4 GHz ISM bandShort-range device communication
GPS/GNSSSatellite navigation frequency bandsReceiving navigation signals
Cellular networksVaries by technology and regionVoice and mobile data
RFIDDepends on the RFID systemTag identification and communication

For example, an ESP32 board may use a PCB antenna or an external antenna connector, depending on the model. Antenna placement, ground-plane design, enclosure materials, and nearby metal objects can all affect wireless performance.

12. Applications of Antennas

Antennas are used in a wide range of electronic systems.

  1. Radio and television: Broadcast and reception of audio and video.
  2. Mobile communication: Cellular voice calls and internet access.
  3. Wi-Fi: Wireless local-area networking.
  4. Bluetooth: Communication between nearby electronic devices.
  5. Satellite systems: Communication and navigation.
  6. Radar: Detecting objects and measuring distance or speed.
  7. IoT: Connecting sensors, microcontrollers, and gateways.
  8. RFID: Identifying tags and tracking items.
  9. Aviation: Aircraft communication and navigation.
  10. Scientific research: Radio astronomy and remote sensing.

13. Advantages of Antennas

  • Enable wireless communication without physical cables.
  • Support communication over a range of distances.
  • Can be designed for different frequencies and applications.
  • Allow directional transmission and reception.
  • Enable compact wireless devices.
  • Support mobile, portable, and IoT systems.

14. Limitations of Antennas

  • Performance depends on frequency, design, and placement.
  • Walls, metal objects, and other obstacles can weaken signals.
  • Nearby electronics can introduce interference.
  • Poor impedance matching can reduce efficiency.
  • Compact antennas may have bandwidth or efficiency limitations.
  • Directional antennas require appropriate alignment for best performance.

15. Safety and Practical Precautions

  • Follow manufacturer instructions when connecting antennas to transmitters.
  • Use antennas designed for the intended frequency band.
  • Avoid transmitting without a suitable antenna or approved RF load where the transmitter requires one.
  • Follow local radio-frequency transmission rules and power limits.
  • Maintain appropriate separation from high-power transmitting antennas.
  • Consider electrostatic discharge precautions when handling sensitive RF circuits.
  • Do not install or service outdoor antennas near overhead power lines.

16. Summary

An antenna is a device that converts electrical signals into electromagnetic waves and incoming electromagnetic waves into electrical signals. Its performance depends on frequency, wavelength, gain, directivity, polarization, impedance, and efficiency.

Dipole, monopole, Yagi, patch, helical, and parabolic reflector antennas are used for different communication requirements.

Key point: Antennas are the essential interface between electronic radio circuits and wireless electromagnetic waves, enabling technologies such as Wi-Fi, Bluetooth, mobile networks, GPS, and satellite communication.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy