Ugenz Academy/IoT Tutorial

Pcb

8 min read1,448 words

Reading progress

Keep learning

PCB (Printed Circuit Board) in Electronics

1. Introduction

A PCB (Printed Circuit Board) is a board used to mechanically support and electrically connect electronic components. It contains conductive copper tracks that carry electrical signals and power between components.

PCBs are essential in almost every modern electronic device, including computers, smartphones, televisions, microcontrollers, IoT devices, and industrial control systems.

Instead of connecting every component with separate wires, a PCB provides an organized and compact way to build electronic circuits.

セラミック・マテリアル事業 | ノリタケ株式会社

DIY Kit - Electronic Locker Guard : DIY Electronic Kits

Electronics Contract Manufacturing (EMS): PCB Assembly | Fason Zon

8

2. Definition of a PCB

A printed circuit board is an insulating board containing conductive pathways, pads, and other copper features used to connect electronic components.

Components can be mounted on the board and connected through soldered joints or other approved assembly methods.

A typical PCB contains:

  • An insulating substrate.
  • Copper conductive tracks.
  • Pads for mounting components.
  • Holes or vias for electrical connections between layers.
  • A protective solder mask.
  • Printed markings called silkscreen.

3. Main Parts of a PCB

Let's Play - Toobers!

web.mit.edu

3.1 Substrate

The substrate is the insulating base material of a PCB. It provides mechanical strength and electrical insulation.

Common substrate materials include:

  • FR-4: Glass-fiber-reinforced epoxy; widely used in standard PCBs.
  • Flexible polyimide: Used in flexible circuit boards.
  • Ceramic materials: Used in certain specialized high-frequency and high-temperature applications.

3.2 Copper Tracks

Copper tracks are conductive pathways that connect components electrically. They carry signals and power throughout the circuit.

Track width and copper thickness must be selected according to current, temperature rise, voltage, and manufacturing requirements.

3.3 Pads

Pads are conductive areas where component leads or surface-mount terminals are soldered.

Common types include through-hole pads and surface-mount pads.

3.4 Vias

Vias are conductive connections between copper layers in a multilayer PCB.

They allow signals and power to travel between different layers of the board.

3.5 Solder Mask

The solder mask is a protective coating applied over much of the copper surface. It helps prevent accidental solder bridges and protects copper from contamination.

It is often green, but other colors are also available.

3.6 Silkscreen

The silkscreen layer contains printed markings such as component labels, pin numbers, polarity symbols, logos, and reference designators.

For example, R1 may identify a resistor, while C1 identifies a capacitor.

4. Types of PCBs

Работа с односторонней печатной платой, правила проектирования и использование

4.1 Single-Sided PCB

Contains conductive copper on one side of the insulating board.

Applications: Simple circuits, basic power supplies, and low-cost electronics.

Double-Sided PCB - Matching Electronic Tech Co., Ltd

4.2 Double-Sided PCB

Contains copper layers on both sides, with connections between layers made using vias.

Applications: More complex electronic circuits and development boards.

Multilayer PCBs Principles, Construction, and Applications

4.3 Multilayer PCB

Contains three or more conductive copper layers separated by insulating materials.

Applications: Computers, smartphones, communication equipment, and advanced embedded systems.

Flexible PCBs Complete Guide to Design Materials Types and Applications

4.4 Flexible PCB

Uses flexible insulating material that can bend to fit a device's shape.

Applications: Cameras, wearable devices, and compact electronics.

Flex & Flex-Rigid PCB’s | Cambridge Circuit Company Ltd

4.5 Rigid-Flex PCB

Combines rigid board sections with flexible circuit sections.

Applications: Compact electronic devices requiring reliable connections between different sections.

5. Through-Hole and Surface-Mount Technology

Electronic components can be mounted on a PCB using different assembly methods.

What are Through Holes on a PCB?

Through-Hole Technology (THT)

Component leads pass through holes in the board and are soldered to pads.

Often convenient for learning, prototyping, and some power components.

Integrated circuit with resistors on PCB

Surface-Mount Technology (SMT)

Components are mounted directly onto conductive pads on the PCB surface.

Supports compact designs and automated manufacturing.

FeatureThrough-holeSurface-mount
Component mountingLeads pass through holesTerminals attach to surface pads
Component sizeOften largerOften smaller
AssemblyEasy to hand-solder for many componentsSmall components may need specialized tools
Typical usePrototypes and selected power componentsModern compact electronic devices

6. How Does a PCB Work?

A PCB connects electronic components through its copper tracks and conductive layers.

For example, in a simple LED circuit:

  1. A power source provides electrical energy.
  2. A copper track connects the supply to a resistor.
  3. Another track connects the resistor to the LED.
  4. The remaining connection returns to the power source.
  5. Current flows through the circuit, causing the LED to illuminate when connected with the correct polarity.

The PCB itself does not normally perform the circuit's logic. It provides the physical and electrical connections that allow the components to operate together.

7. PCB Design Process

PCB design generally follows these steps:

1

Circuit design

Draw the schematic and select components.

2

PCB layout

Arrange components and define copper tracks.

3

Design rule checking

Check clearances, track widths, connections, and manufacturing limits.

4

Manufacturing

Produce the board and conductive layers.

5

Assembly

Mount and solder components.

6

Testing

Inspect the board and verify circuit operation.

Popular PCB design software

  • KiCad: Free and open-source PCB design software.
  • Autodesk Eagle: PCB design software historically used for electronics projects.
  • EasyEDA: Browser-based and desktop PCB design tools.
  • Altium Designer: Professional PCB design software.

Beginners can start with KiCad or EasyEDA to create schematics and PCB layouts.

8. PCB Manufacturing Methods

PCB manufacturing depends on the board design and production requirements.

Common steps include:

  • Preparing the substrate and copper layers.
  • Transferring the circuit pattern to copper.
  • Etching away unwanted copper.
  • Drilling holes where required.
  • Applying solder mask and silkscreen.
  • Adding a suitable surface finish to exposed copper pads.
  • Performing electrical and visual inspections.

Multilayer and high-density PCBs require additional processes, including layer alignment and lamination.

9. Applications of PCBs

PCBs are used in many areas of electronics.

  1. Computers: Motherboards, graphics cards, and storage devices.
  2. Mobile phones: Mainboards, charging circuits, and camera modules.
  3. IoT devices: ESP32 boards, smart sensors, and automation controllers.
  4. Consumer electronics: Televisions, speakers, remote controls, and appliances.
  5. Automotive electronics: Control modules and sensor interfaces.
  6. Industrial equipment: Motor controllers, power supplies, and monitoring systems.
  7. Medical equipment: Electronic monitoring and diagnostic devices.
  8. Communication systems: Networking hardware, radios, and signal-processing equipment.

10. Advantages of PCBs

  • Reduce the number of separate wires needed.
  • Make circuits compact and organized.
  • Provide repeatable electrical connections.
  • Support automated manufacturing.
  • Simplify inspection and troubleshooting.
  • Enable complex electronic designs using multiple layers.

11. Limitations of PCBs

  • Custom manufacturing can be expensive for small quantities.
  • Damaged tracks and pads may be difficult to repair.
  • Poor layout can cause electrical noise or signal-integrity problems.
  • Excessive heat can damage the board or components.
  • PCB designs must follow electrical, thermal, and manufacturing constraints.
  • Multilayer boards are more complex to inspect and repair.

12. PCB Testing and Troubleshooting

A PCB should be inspected and tested before it is used in a finished device.

Common checks include:

  • Visual inspection: Look for damaged components, burnt areas, cracked solder joints, and solder bridges.
  • Continuity testing: Verify that intended conductive paths are connected.
  • Short-circuit testing: Check for unintended connections between power and ground.
  • Voltage measurement: Confirm that supply voltages are correct.
  • Component testing: Test suspected faulty components where practical.
  • Functional testing: Power the circuit safely and verify its intended operation.

Always disconnect power before performing resistance or continuity measurements. Use suitable precautions when testing high-voltage circuits.

13. Safety Precautions

  • Disconnect the power supply before soldering or repairing a PCB.
  • Use eye protection when cutting component leads.
  • Work in a well-ventilated area when soldering.
  • Avoid touching a hot soldering iron or recently soldered joints.
  • Use electrostatic discharge (ESD) precautions for sensitive components.
  • Never assume a disconnected-looking board is safe; capacitors may retain dangerous charge.
  • Follow appropriate safety procedures for mains-powered and high-voltage equipment.

14. Summary

A printed circuit board is an insulating board with conductive copper pathways that connect electronic components. PCBs are available in single-sided, double-sided, multilayer, flexible, and rigid-flex designs.

Understanding PCB layers, copper tracks, pads, vias, component mounting methods, layout, manufacturing, and testing is essential for electronics design and repair.

Key point: A PCB provides the physical structure and electrical connections that allow electronic components to function together as a complete circuit.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy