Ugenz Academy/IoT Tutorial

Boost Converter

6 min read1,171 words

Reading progress

Keep learning

Boost Converter in Electronics

1. Introduction

A boost converter is a type of DC-to-DC converter that increases a lower DC input voltage to a higher DC output voltage. It is also called a step-up converter.

For example, a boost converter can increase a 3.7 V battery voltage to 5 V or convert 5 V DC into 12 V DC, provided the converter is designed for the required input, output, and power levels.

Boost converters are widely used in battery-powered devices, solar power systems, LED drivers, portable electronics, and IoT projects.

2. What Is a Boost Converter?

A boost converter is an electronic circuit that uses a switching transistor, an inductor, a diode or synchronous switch, and a capacitor to produce an output voltage higher than its input voltage.

DC Input

3.7 V

Boost Converter

Step-up voltage conversion

DC Output

5 V

Example of increasing a battery voltage to 5 V

3. Main Components of a Boost Converter

DC/DC Converters: Devices for Converting to a Higher Voltage - Technical Articles

eepower.com

ComponentFunction
InductorStores energy in its magnetic field
MOSFET or switching transistorRapidly switches current on and off
DiodeAllows stored energy to reach the output in a basic asynchronous design
CapacitorSmooths the output voltage and reduces ripple
Control circuitControls switching and regulates output voltage
LoadUses the output power

In a synchronous boost converter, a controlled MOSFET may replace the diode to reduce conduction losses.

4. Working Principle of a Boost Converter

A boost converter works by storing energy in an inductor and then transferring that energy to the output at a voltage higher than the input.

It operates in two main states.

A. Switch ON

  • The MOSFET turns on.
  • Current flows from the input source through the inductor and switch.
  • The inductor stores energy in its magnetic field.
  • The inductor current increases.
  • In the basic circuit, the diode prevents the output capacitor from discharging back through the switch.

B. Switch OFF

  • The MOSFET turns off.
  • The inductor resists the sudden reduction in current and releases its stored energy.
  • The inductor voltage adds to the input voltage.
  • Current flows through the diode to the output capacitor and load.
  • The output voltage can rise above the input voltage.

The switching process repeats rapidly, producing a higher DC output voltage.

5. What Is Duty Cycle?

The duty cycle represents the fraction of each switching period during which the switch remains ON.

D=T_ONT×100%D=\frac{T\_{\text{ON}}}{T}\times100\%

Where:

  • DD = duty cycle
  • T_ONT\_{\text{ON}} = switch ON time
  • TT = total switching period

For example, a duty cycle of 40% means the switch is ON for 40% of each switching period.

6. Boost Converter Formula

For an ideal boost converter operating in continuous conduction mode, the relationship between input voltage, output voltage, and duty cycle is:

V_out=V_in1−DV\_{\text{out}}=\frac{V\_{\text{in}}}{1-D}

Where:

  • V_outV\_{\text{out}} = output voltage
  • V_inV\_{\text{in}} = input voltage
  • DD = duty cycle expressed as a decimal

Example

Suppose:

  • Input voltage = 3 V
  • Duty cycle = 0.4

Using the formula:

V_out=31−0.4V\_{\text{out}}=\frac{3}{1-0.4} V_out=30.6V\_{\text{out}}=\frac{3}{0.6} V_out=5 V\boxed{V\_{\text{out}}=5\text{ V}}

Therefore, the ideal output voltage is 5 V.

In a real circuit, switching losses, component resistance, diode voltage drops, and control limitations affect the output. The ideal formula also does not account for current limits or thermal constraints.

7. Types of Boost Converters

Voltage Lifting Module with MT3608 28V 2A - Optimus Digital

1. Basic Boost Converter

Uses an inductor, switching transistor, diode, and capacitor to increase DC voltage.

Applications: battery-powered electronics and small IoT projects.

LTC3786 Datasheet and Product Info | Analog Devices

2. Synchronous Boost Converter

Uses a controlled MOSFET instead of the usual output diode to reduce conduction losses in suitable designs.

Applications: efficient battery-powered and portable devices.

Elecbee High Voltage DC-DC Boost Converter 5V-12V Step up to 300V-1200V Power Module

3. High-Voltage Boost Converter

Increases a low DC input voltage to a substantially higher output voltage using components rated for the required voltage and power.

Applications: specialized power supplies and certain LED driver circuits.

8. Boost Converter vs. Buck Converter

FeatureBoost ConverterBuck Converter
Main functionIncreases voltageDecreases voltage
Other nameStep-up converterStep-down converter
Typical example3.7 V to 5 V12 V to 5 V
Main energy-storage componentInductorInductor
Switching transistorYesYes
Output voltage relative to inputHigherLower
Common applicationsBattery boosting, LED driversMicrocontroller supplies, processors

9. Efficiency of a Boost Converter

Efficiency measures how much input power is delivered to the output.

η=P_outP_in×100%\eta=\frac{P\_{\text{out}}}{P\_{\text{in}}}\times100\%

For example, if a boost converter receives 10 W and delivers 8.5 W:

η=8.510×100%\eta=\frac{8.5}{10}\times100\% η=85%\boxed{\eta=85\%}

The remaining 1.5 W is lost through switching, conduction, and other circuit losses.

An important point is that increasing voltage does not create additional power. Because real converters have losses, the output current available at a higher voltage is generally lower than the input current.

10. Applications of Boost Converters

Boost converters are commonly used in:

  • Power banks and portable electronics
  • Battery-powered IoT devices
  • ESP32 and Arduino projects requiring a higher supply voltage
  • Solar energy systems
  • LED drivers
  • Electric vehicle power electronics
  • Portable medical and measurement equipment
  • Specialized high-voltage power supplies

For example, a single lithium-ion cell has a voltage that varies with its state of charge. A suitable boost converter can provide a regulated 5 V supply for a compatible device, provided the battery and converter can supply the required current.

11. Advantages and Disadvantages

Advantages

  • Increases DC voltage efficiently.
  • Works with low-voltage battery sources.
  • Can provide a regulated output voltage.
  • Is compact and suitable for portable devices.
  • Can offer better efficiency than resistive voltage-raising arrangements.

Disadvantages

  • Cannot supply unlimited output power.
  • Input current can be high when boosting from a very low voltage.
  • Switching may introduce electrical noise and ripple.
  • Requires careful component selection and circuit design.
  • Output voltage is limited by the converter's ratings and control design.

12. Summary

A boost converter is a step-up DC-to-DC converter that increases a lower input voltage to a higher output voltage. It uses an inductor to store energy, a switching transistor to control energy transfer, and an output capacitor to smooth the voltage.

The duty cycle controls the ideal voltage-conversion ratio. Boost converters are important in portable electronics, battery-powered systems, IoT devices, and other applications where the available DC voltage is lower than the required supply voltage.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy