Potentiometers
1. Introduction
A potentiometer is a three-terminal variable resistor that allows us to adjust electrical voltage by rotating a shaft or moving a slider. It is commonly used to control volume, brightness, speed settings, and other adjustable functions in electronic circuits.
Unlike a fixed resistor, whose resistance is designed to remain constant, a potentiometer allows its resistance to be changed manually.
A typical potentiometer has three terminals:
- Terminal 1: One end of the resistive element.
- Terminal 2: The middle terminal, called the wiper.
- Terminal 3: The other end of the resistive element.
The wiper moves along the resistive element and changes the resistance between the middle terminal and either outer terminal.
Potentiometers are widely used in audio equipment, Arduino projects, sensor circuits, control panels, and electronic instruments.
2. Construction of a Potentiometer
A potentiometer consists of several main parts.
Resistive element: A strip or track of resistive material that provides electrical resistance. It may be made from carbon, conductive plastic, or other resistive materials.
Wiper: A movable electrical contact that slides along the resistive track.
Shaft or slider: The mechanical part used to move the wiper. Rotary potentiometers use a rotating shaft, while linear potentiometers use a sliding control.
Terminals: The electrical connections that connect the resistive element and wiper to a circuit.
Housing: The outer body that supports and protects the internal components.
When the shaft rotates or the slider moves, the wiper changes position along the resistive track. As a result, the resistance between the wiper and each outer terminal changes.
3. Working Principle of a Potentiometer
A potentiometer works by changing the effective length of the resistive path between its terminals.
Suppose a 10 kΩ potentiometer is connected between a 5 V supply and ground.
The two outer terminals are connected to the supply and ground, while the middle terminal provides an adjustable output voltage.
As the shaft rotates, the wiper moves along the resistive track. The output voltage changes according to the wiper's position.
For an ideal linear potentiometer:
- At one end, the output is approximately 0 V.
- At the middle, the output is approximately half the supply voltage.
- At the other end, the output is approximately equal to the supply voltage.
For a 5 V supply, the output can therefore vary approximately from 0 V to 5 V.
The actual output depends on the potentiometer's taper, wiring, loading, and mechanical limits.
4. The Three Terminals of a Potentiometer
10pcs 10K Ohm Potentiometer Single Linear – Electronic Pro
The three terminals have different functions depending on how the potentiometer is connected.
| Terminal | Function |
|---|---|
| Outer terminal 1 | One end of the resistive track |
| Middle terminal | Wiper; adjustable output connection |
| Outer terminal 2 | Other end of the resistive track |
For voltage adjustment, connect the two outer terminals across the supply and ground, then connect the middle terminal to the circuit's input.
Swapping the two outer terminals reverses the direction in which the output voltage changes as the knob is turned.
5. Types of Potentiometers
A. Rotary Potentiometer
Bourns 91 25kΩ Rotary Potentiometer 1-Gang Panel Mount, 91R1A-R22-B17L | RS
A rotary potentiometer changes resistance when its shaft is rotated.
It is one of the most common types and is used in devices where a user turns a knob to adjust a setting.
Applications:
- Audio volume control
- Amplifier gain adjustment
- LED brightness control
- Adjustable voltage circuits
- Electronic control panels
B. Linear Potentiometer
10K Linear 60mm Slide Potentiometer — Switch Electronics | Your One Stop Component Shop
A linear potentiometer changes resistance when its wiper moves along a straight resistive track.
It is commonly used when an adjustment needs to be made using a sliding control rather than a rotating knob.
Applications:
- Audio mixing consoles
- Equalizers
- Lighting controllers
- Position measurement
- Electronic instruments
C. Trimmer Potentiometer
RI3362M Square Trimmer Potentiometer Adjustable Trimming Resistor Pin In Row
A trimmer potentiometer, often called a trimpot, is a small adjustable resistor designed mainly for calibration or occasional adjustment.
It is usually adjusted using a small screwdriver.
Applications:
- Calibrating sensors
- Adjusting circuit reference voltages
- Setting amplifier gain
- Calibrating measuring instruments
- Fine-tuning electronic circuits
D. Digital Potentiometer
A digital potentiometer is an electronic component that provides an adjustable resistance controlled by digital signals instead of a manually operated shaft.
A microcontroller can change its setting through an interface such as SPI or I²C, depending on the device.
Applications:
- Automatically controlled audio levels
- Programmable gain circuits
- Remote adjustments
- Microcontroller-based systems
- Automated calibration
Unlike a conventional potentiometer, a digital potentiometer has discrete adjustment steps and specific voltage, current, and resistance limitations.
6. Potentiometer as a Voltage Divider
One of the most important uses of a potentiometer is as an adjustable voltage divider.
When the outer terminals are connected to a voltage supply and ground, the wiper provides a variable fraction of the input voltage.
For an ideal, unloaded linear potentiometer:
Where:
- = output voltage at the wiper
- = voltage across the outer terminals
- = wiper position, ranging approximately from 0 to 1
For example, if the input voltage is 10 V and the wiper is at 30% of the track measured from ground:
The output voltage is approximately 3 V.
This principle is used in adjustable voltage references, analog controls, and sensor interfaces.
7. Potentiometer Resistance and Taper
Potentiometers are available in different nominal resistance values, including:
- 100 Ω
- 1 kΩ
- 5 kΩ
- 10 kΩ
- 50 kΩ
- 100 kΩ
- 1 MΩ
The correct value depends on the circuit's requirements.
Potentiometers also have different resistance tapers.
Linear taper: Resistance changes approximately proportionally to shaft position. These are commonly marked with the letter B in some markets, although marking conventions vary.
Logarithmic or audio taper: Resistance changes nonlinearly with shaft position. This is often used for audio volume controls because human hearing perceives loudness approximately logarithmically.
The letter markings A and B can mean different tapers depending on the manufacturer or regional convention, so the datasheet should be checked.
8. Potentiometer as a Variable Resistor
A potentiometer can also be used as a two-terminal variable resistor, often called a rheostat connection.
In this configuration, one outer terminal and the wiper are used. As the wiper moves, the resistance between those two connections changes.
This arrangement can be used for adjustable current control in suitable low-power circuits.
However, a potentiometer must not be used beyond its rated power or wiper-current limits. For controlling large motor currents or high-power loads, a properly rated power controller is generally required.
9. Potentiometer with Arduino or ESP32
A potentiometer can provide an adjustable analog voltage to a microcontroller's analog input.
For example, a suitable 10 kΩ potentiometer can be connected to an ESP32 as follows:
| Potentiometer connection | ESP32 connection |
|---|---|
| Outer terminal 1 | 3.3 V |
| Middle terminal (wiper) | Suitable ADC input pin |
| Outer terminal 2 | GND |
When the knob is rotated, the voltage at the wiper changes. The ESP32 reads this voltage using its analog-to-digital converter (ADC).
The microcontroller can then use the reading to control LED brightness, set a threshold, adjust a menu value, or control another suitable output.
Important: Keep the voltage on an ESP32 input within its permitted range. Do not apply 5 V directly to an ESP32 ADC input; using 3.3 V as the potentiometer supply is appropriate for this example.
10. Advantages and Limitations
Advantages
- Simple and easy to use.
- Provides smooth manual adjustment.
- Available in many resistance values.
- Can work as a voltage divider or variable resistor.
- Inexpensive and widely available.
Limitations
- Mechanical types can wear out over time.
- Dust and wear may cause noisy or intermittent contact.
- Resistance and output may vary within the component's tolerance.
- The wiper can introduce electrical noise.
- Most ordinary potentiometers are unsuitable for directly controlling high-power loads.
11. Potentiometer vs Fixed Resistor
| Feature | Potentiometer | Fixed Resistor |
|---|---|---|
| Resistance | Adjustable | Designed to be constant |
| Terminals | Usually 3 | Usually 2 |
| Main purpose | Adjustment and voltage division | Current control and fixed voltage division |
| Moving parts | Present in mechanical types | Generally absent |
| Common example | Volume knob | LED current-limiting resistor |
A potentiometer is useful whenever a circuit needs an adjustable input or output, while a fixed resistor is used when a specific resistance is required.