LEDs (Light-Emitting Diodes)
1. What Is an LED?
An LED (Light-Emitting Diode) is a semiconductor electronic component that produces light when electric current flows through it in the forward direction.
LED stands for Light-Emitting Diode. It belongs to the diode family, which means it allows current to flow primarily in one direction under normal operating conditions.
5mm LED - Light Emitting Diode(10pcs) - Aaenics Store
Unlike an ordinary diode, which is primarily designed to control current, an LED is designed to convert electrical energy into light.
LEDs are commonly used in:
- Indicator lights on electronic devices
- Home and street lighting
- Digital displays
- Traffic signals
- Television and monitor backlighting
- Remote controls and optical communication
- Arduino and ESP32 projects
For example, when you turn on an LED connected to an Arduino board, electric current flows through the LED and causes it to emit light.
2. LED Symbol and Terminals
An LED has two terminals:
- Anode (A): The positive-side terminal during normal forward operation.
- Cathode (K): The negative-side terminal during normal forward operation.
Vector illustration of a light-emitting diode symbol on a white background.
The circuit symbol resembles a standard diode symbol, with two arrows pointing outward to represent emitted light.
How to identify LED terminals
How are the LEDs represented in the Starter Kit projects book? – Arduino Help Center
For many standard through-hole LEDs:
| Feature | Typical identification |
|---|---|
| Longer lead | Anode (+) |
| Shorter lead | Cathode (−) |
| Flat edge on LED body | Usually the cathode side |
| Larger internal metal electrode | Usually the cathode |
These identification methods are common but not universal. Check the datasheet when the terminal orientation is uncertain.
3. Construction of an LED
An LED is made from semiconductor materials that emit light when electrically energized.
Its main parts include:
1. Semiconductor chip: The active region where electrical energy is converted into light.
2. Anode and cathode leads: Provide electrical connections to the semiconductor chip.
3. Reflective cup or electrode structure: Helps direct the generated light outward in many LED designs.
4. Encapsulation or lens: Protects the semiconductor chip and can help focus or diffuse the emitted light.
5. Package: Holds the LED components together and provides mechanical protection.
What is an LED? - LedStore - Ledstore.pro
The construction varies depending on the LED package. Surface-mount LEDs, high-power lighting LEDs, and infrared LEDs may have very different physical designs.
4. Working Principle of an LED
An LED works on the principle of electroluminescence.
Electroluminescence is the emission of light from a material when electrical energy excites it.
The process occurs in the following steps.
LED Series Resistor: Calculator & Conversion Formula | element14 India
Step 1: Forward voltage is applied
A suitable voltage is applied across the LED with the anode at a higher potential than the cathode. A current-limiting circuit controls the current.
Step 2: Electrons and holes move
Forward bias allows electrons and holes to enter the active region of the semiconductor junction.
Whiter, Brighter LEDs | DigiKey
Step 3: Recombination occurs
Electrons recombine with holes. In suitable semiconductor materials, this process releases energy as photons, which are particles of light.
5mm LED Red - Clear - 10-pack | Kiwi Electronics
Step 4: Light is emitted
The photons leave the semiconductor and pass through the LED package. The LED appears illuminated.
The color of the emitted light depends primarily on the semiconductor material and its energy band gap.
5. Why Do LEDs Produce Different Colors?
LED colors depend on the energy released when electrons recombine with holes in the semiconductor.
The energy of a photon is related to its wavelength by:
Where:
- = photon energy
- = Planck's constant
- = speed of light
- = wavelength of light
Higher-energy photons have shorter wavelengths, while lower-energy photons have longer wavelengths.
Wavelength Explained: Definition, Formula, Spectrum Types & Real-World Applications
For example:
- Red light has a longer wavelength than blue light.
- Blue light has a shorter wavelength and higher photon energy than red light.
- Green light falls between blue and red in the visible spectrum.
Different semiconductor materials are selected to produce different wavelengths.
6. Types of LEDs
LEDs are available in different colors, sizes, packages, and operating modes.
4305H1 - LED Through Hole 5mm (T-1 3/4) Red 650 nm 68 mcd 2.1V | HMI Components | VCC
1. Single-Color LED
Emits one main color, such as red, green, yellow, or blue.
Applications: Power indicators, status lights, and simple electronic projects.
Jual LED RGB 4 PIN WARNA MERAH HIJAU BIRU 5mm ( ARDUINO ) - Common Cathode | Shopee Indonesia
2. RGB LED
Contains red, green, and blue LED elements. By controlling their brightness independently, many colors can be produced.
Applications: Decorative lighting, displays, Arduino projects, and smart lighting.
3W High Power LED with Aluminum base plate | ePartners NZ
3. White LED
Most white LEDs use a blue LED chip with a phosphor coating that converts some of the blue light into longer-wavelength light. The combined light appears white.
Applications: Home lighting, flashlights, vehicle lamps, and streetlights.
4. Infrared LED
Emits infrared radiation, which is outside the range of human vision.
Applications: Remote controls, proximity sensors, optical communication, and object detection.
LEDs: What Are They? (Definition, Types, and Uses) - Engineer Fix
5. SMD LED
SMD stands for Surface-Mount Device. These LEDs are designed to be mounted directly onto a printed circuit board.
Applications: LED strips, displays, compact electronics, and modern lighting products.
VERO29 COB LED 2700K-6500K - 185 lm/W Efficacy | High CRI Light Engine
6. COB LED
COB stands for Chip on Board. Multiple LED chips are mounted closely together on a common substrate, creating a compact light-emitting area.
Applications: Spotlights, floodlights, and high-intensity lighting.
7. OLED
OLED stands for Organic Light-Emitting Diode. It uses organic electroluminescent materials and is a distinct technology from conventional inorganic semiconductor LEDs.
Applications: Smartphone displays, televisions, wearable devices, and flexible displays.
7. LED Forward Voltage
An LED needs a suitable forward voltage for its intended operating current.
Unlike an ordinary silicon diode, which commonly has a forward drop around 0.6–0.7 V at certain currents, LEDs generally require higher forward voltages.
Typical approximate forward-voltage ranges are:
| LED color/type | Typical forward voltage |
|---|---|
| Red | 1.6–2.2 V |
| Yellow | 1.8–2.2 V |
| Green | 1.8–3.2 V |
| Blue | 2.5–3.5 V |
| White | 2.5–3.5 V |
| Infrared | Often 1.1–1.8 V |
These values are approximate. The exact voltage depends on the LED's semiconductor material, current, and temperature.
Important: Forward voltage is not the same as the supply voltage. A resistor or suitable LED driver is normally needed to control the current.
8. Why Does an LED Need a Resistor?
An LED's current can rise rapidly when its forward voltage is exceeded. Connecting an ordinary LED directly to a voltage source without appropriate current control can damage it.
A current-limiting resistor reduces and controls the current flowing through the LED.
A basic series circuit contains:
- A DC power supply
- A resistor
- An LED
무료 회로도 메이커 | 회로 그리기 | SciDraw AI
The resistor value can be calculated using Ohm's law:
Where:
- = resistor resistance in ohms
- = supply voltage
- = LED forward voltage
- = desired LED current
Example: Connecting an LED to 5 V
Suppose:
- Supply voltage = 5 V
- Red LED forward voltage = 2 V
- Desired current = 10 mA = 0.01 A
First, calculate the voltage across the resistor:
Then calculate the resistance:
A standard 330 Ω resistor is a reasonable choice, giving an approximate current of:
This assumes the LED's forward voltage is approximately 2 V at the operating current.
9. Connecting an LED to Arduino or ESP32
LEDs are often connected to microcontrollers for status indicators, alarms, and visual feedback.
DIYables 5MM Red Light LED for Arduino, ESP32, ESP8266, Raspberry Pi
A typical connection is:
- Connect a GPIO pin to a current-limiting resistor.
- Connect the other end of the resistor to the LED anode.
- Connect the LED cathode to GND.
- Configure the GPIO as an output.
- Set the output HIGH to turn the LED on and LOW to turn it off.
For a standard LED connected this way, the GPIO supplies current when HIGH.
The GPIO voltage, permitted output current, and LED current must all remain within the microcontroller's specifications. A GPIO pin should not be used to power a high-power LED directly; use an appropriate driver circuit instead.
10. LED Current and Power Consumption
An LED consumes electrical power while operating.
The power dissipated in the LED is approximately:
For an LED with a forward voltage of 2 V and a current of 10 mA:
Therefore, the LED dissipates approximately 20 mW.
The resistor also consumes power:
Using the previous example with 330 Ω and approximately 9.1 mA:
The resistor should have an adequate power rating, with suitable margin for the actual operating conditions.
11. LED Brightness Control
LED brightness depends on several factors, including current, LED efficiency, optical design, and temperature.
There are two common ways to control brightness.
A. Current Control
Reducing the current generally reduces the LED's light output. Increasing the current can increase brightness, but only within the LED's specified operating limits.
B. Pulse-Width Modulation (PWM)
PWM rapidly switches the LED on and off. Changing the percentage of time it remains on changes its average brightness.
The duty cycle is the percentage of each PWM period for which the signal is HIGH.
For example:
- 25% duty cycle: LED is on for one-quarter of each period.
- 50% duty cycle: LED is on for half of each period.
- 100% duty cycle: LED remains on continuously.
PWM is widely used in Arduino and ESP32 projects to adjust LED brightness and control the red, green, and blue channels of RGB LEDs.
12. RGB LEDs
An RGB LED combines three LED elements:
- Red
- Green
- Blue
By changing the brightness of each element, the LED can produce a wide range of colors.
Examples of color mixing include:
| Red | Green | Blue | Approximate result |
|---|---|---|---|
| On | Off | Off | Red |
| Off | On | Off | Green |
| Off | Off | On | Blue |
| On | On | Off | Yellow |
| Off | On | On | Cyan |
| On | Off | On | Magenta |
| On | On | On | White, depending on LED balance |
RGB LEDs commonly come in two configurations:
Common cathode: The three cathodes are connected together, usually to ground. Each color is activated by supplying current to its anode through a suitable resistor or driver.
Common anode: The three anodes are connected together. Each color is typically activated by sinking current through its cathode.
The correct wiring and control logic depend on which type is used.
13. LED Efficiency and Heat
LEDs are often more energy-efficient than traditional incandescent lamps because a greater proportion of their electrical input can be converted into useful light.
However, LEDs are not perfectly efficient. Some electrical energy becomes heat.
High-power LEDs require appropriate thermal management because excessive junction temperature can reduce light output, shift color, shorten lifespan, or cause failure.
Common thermal-management methods include:
- Heat sinks
- Metal-core circuit boards
- Suitable thermal interface materials
- Proper ventilation
- Operating within rated current limits
14. Advantages of LEDs
- Low energy consumption: LEDs can produce useful light with relatively low electrical power.
- Long service life: Properly operated LEDs can last much longer than incandescent lamps.
- Fast switching: LEDs can turn on and off very quickly.
- Compact size: LEDs are available in very small packages.
- Many colors: Different semiconductor materials and designs produce different colors.
- Low-voltage operation: Many indicator LEDs operate at low DC voltages when used with current control.
- Mechanical durability: LEDs generally resist vibration better than fragile incandescent filaments.
15. Limitations of LEDs
- Current must be controlled: Excessive current can damage the LED.
- Temperature affects performance: Heat can reduce efficiency and lifespan.
- Forward voltage varies: Different colors and LED designs require different operating voltages.
- High-power LEDs need cooling: Thermal management is essential for many lighting applications.
- Direction matters: Ordinary LEDs are designed to operate with the correct polarity.
- Drivers may be required: High-power LEDs usually need specialized constant-current drivers.
16. LED vs. Ordinary Diode
| Feature | Ordinary diode | LED |
|---|---|---|
| Main purpose | Rectification, switching, or protection | Producing light |
| Light emission | Not intended for visible light emission | Designed to emit light |
| Forward voltage | Common silicon types often around 0.6–0.7 V at certain currents | Often around 1.6–3.5 V, depending on type |
| Current control | Depends on the circuit and application | Essential for normal operation |
| Semiconductor material | Commonly silicon | Materials selected for light emission |
| Applications | Power supplies, protection, signal circuits | Indicators, lighting, displays, optical systems |
17. Important LED Formulas
| Quantity | Formula |
|---|---|
| Current-limiting resistance | |
| LED power | |
| Resistor power | |
| Resistor voltage | |
| Duty cycle |
Where is the supply voltage, is the LED forward voltage, is the current, and is the PWM period.
Conclusion
An LED is a semiconductor diode that converts electrical energy into light through electroluminescence. Its color depends primarily on the semiconductor material, while its brightness depends on current and other operating conditions. LEDs are used in indicators, displays, lighting, sensors, and microcontroller projects. To operate an LED reliably, its polarity, current, voltage, power rating, and thermal requirements must be considered.