Topology

9 min read1,636 words

3. Network Topology

What is Network Topology?

Network topology refers to the arrangement or layout of devices and connections in a computer network.

In simple words:

Topology describes how computers, network devices, and communication links are connected to each other.

For example:

PC ─── PC ─── PC

and

PC │ PC ─ Switch ─ PC │ PC

are two different network topologies.

Topology can describe both:

  • Physical topology → How devices and cables are physically arranged.
  • Logical topology → How data actually flows through the network.

Types of Network Topology

The major network topologies are:

  1. Bus Topology
  2. Star Topology
  3. Ring Topology
  4. Mesh Topology
  5. Tree Topology
  6. Hybrid Topology
  7. Point-to-Point Topology

1. Bus Topology

In Bus topology, all devices are connected to a single main communication cable, called the backbone.

Main Backbone ──────────────────────────────── │ │ │ PC1 PC2 PC3

All devices share the same communication medium.

How it works

When one computer sends data:

PC1 ────────────────> PC2 │ │ └────────> PC3 ──────┘

The signal travels along the backbone, and the intended device processes the data.

Terminators

Traditional bus networks require terminators at both ends of the backbone.

[T]──PC1──PC2──PC3──PC4──[T]

[T] = Terminator

Terminators help prevent signals from reflecting back along the cable.

Advantages

  • Simple design
  • Requires less cable
  • Relatively inexpensive
  • Easy to understand

Disadvantages

  • Backbone failure can bring down the network
  • Troubleshooting can be difficult
  • Performance decreases as traffic increases
  • Limited scalability
  • A break in the main cable can affect multiple devices

Historical example

Older Ethernet networks using coaxial cable commonly used bus topology.

2. Star Topology

In Star topology, every device connects to a central device, usually a switch.

PC1 │ │ PC2 ─────── Switch ─────── PC3 │ │ PC4

This is one of the most common topologies used in modern Ethernet LANs.

How it works

If PC1 wants to communicate with PC3:

PC1 │ ↓ Switch │ ↓ PC3

The switch forwards the traffic toward the appropriate device.

Advantages

  • Easy to install
  • Easy to manage
  • Easy to troubleshoot
  • Failure of one cable usually affects only one device
  • Easy to add or remove devices
  • Good performance with switches

Disadvantages

  • Central switch is a critical point
  • Requires more cable than bus topology
  • If the central switch fails, connected devices lose network connectivity

Real-world example

A computer lab:

Switch / │ \ PC1 PC2 PC3 │ │ │ PC4 PC5 PC6

3. Ring Topology

In Ring topology, each device is connected to two neighboring devices, forming a closed loop.

PC1 ───── PC2 │ │ │ │ PC4 ───── PC3

Data travels around the ring according to the technology being used.

Example

PC1 → PC2 → PC3 → PC4 → PC1

Some historical ring networks used token passing, where a token controlled which device could transmit.

Advantages

  • Predictable access in token-based implementations
  • Every device has an organized communication path
  • Can perform consistently under certain traffic conditions

Disadvantages

  • A single link/device failure can disrupt the ring in a simple implementation
  • Troubleshooting can be harder
  • Adding/removing devices can interrupt the network
  • Less common in modern ordinary LANs

Important

Don't assume that every ring network sends data in exactly one direction. Some implementations use dual rings or other mechanisms for redundancy.

4. Mesh Topology

In Mesh topology, devices have multiple connections to other devices.

There are two main types:

  • Full Mesh
  • Partial Mesh

Full Mesh

In a full mesh, every device is directly connected to every other device.

For example, with four devices:

PC1 / | \ / | \ PC2──┼──PC3 \ | / \ | / PC4

More conceptually:

PC1 ───── PC2 │ \ / │ │ \ / │ │ \ / │ PC3 ─────── PC4

The important idea is that each node has a direct connection to every other node.

Number of links

For n devices, a full mesh requires:

n(n − 1) / 2

links.

For example:

  • 3 devices → 3 links
  • 4 devices → 6 links
  • 5 devices → 10 links

This is why full mesh becomes expensive as the network grows.

Advantages

  • Very high redundancy
  • Multiple paths between devices
  • Failure of one link doesn't necessarily disconnect devices
  • Good reliability

Disadvantages

  • Very expensive
  • Requires many cables/ports
  • Difficult to install
  • Difficult to maintain as the network grows

Partial Mesh

In partial mesh, only some devices have multiple connections.

Router1 / \ / \ Router2 ─── Router3 │ Router4

Partial mesh is much more practical than full mesh for many real-world networks.

5. Tree Topology

Tree topology combines hierarchical organization with multiple star-like networks.

It looks like a tree:

Core │ ┌──────┴──────┐ │ │ Switch1 Switch2 / \ / \ PC1 PC2 PC3 PC4

A central/core device connects to distribution devices, which connect to other devices.

Advantages

  • Highly scalable
  • Easy to organize hierarchically
  • Suitable for large networks
  • Easier management by network layers

Disadvantages

  • Failure of an important higher-level device can affect many devices
  • More complex than a simple star
  • Requires more infrastructure

Example

Large organizations and campus networks often use hierarchical designs resembling tree topology.

6. Hybrid Topology

Hybrid topology combines two or more different topology types.

For example:

Star Network / | \ PC PC PC \ | / ── Switch ── │ Backbone │ ┌────┴────┐ Ring Star

A network could combine:

  • Star + Bus
  • Star + Ring
  • Star + Mesh
  • Multiple other combinations

Advantages

  • Flexible
  • Scalable
  • Can be designed according to requirements
  • Suitable for large and complex networks

Disadvantages

  • More expensive
  • More complicated
  • Requires careful planning
  • Troubleshooting can be more difficult

7. Point-to-Point Topology

Point-to-point topology provides a direct connection between two devices.

Device A ───────────────── Device B

There are only two endpoints.

Examples

  • Router-to-router link
  • Dedicated communication link
  • Direct serial communication
  • Some WAN connections

Advantages

  • Simple
  • Fast
  • Easy to configure
  • Dedicated connection

Disadvantages

  • Only connects two endpoints
  • Not suitable by itself for connecting many devices

Physical vs Logical Topology

This is an important concept.

Physical Topology

Describes how devices and cables are physically arranged.

Example:

Switch / | \ PC PC PC

This is physically a star.

Logical Topology

Describes how data flows through the network.

The physical arrangement and logical data flow don't necessarily have to be identical.

For example, a network may physically use a particular wiring arrangement while the communication protocol determines a different logical flow.

Topology Comparison

TopologyMain StructureMain AdvantageMain Disadvantage
BusSingle backboneLow cable usageBackbone failure affects network
StarCentral switch/deviceEasy managementCentral device is critical
RingClosed loopOrganized communicationFailure can disrupt simple rings
MeshMultiple interconnectionsHigh redundancyExpensive
TreeHierarchicalScalableHigher-level failures can affect branches
HybridCombinationFlexibleComplex
Point-to-PointDirect linkSimple and fastOnly two endpoints

Star vs Bus

This is a common exam comparison.

Bus

PC ─── PC ─── PC ─── PC Backbone

All devices share a common backbone.

Star

PC │ PC ── Switch ── PC │ PC

Every device has a separate connection to the central device.

Key difference

Bus: One shared backbone.

Star: Central connecting device.

Star vs Mesh

Star

PC │ PC ── Switch ── PC │ PC

Mesh

PC1 ───── PC2 │ \ / │ │ \ / │ │ \ / │ PC3 ─────── PC4

Star: Simpler and cheaper.

Mesh: More redundant but more expensive.

Real-World Example

Consider a college network:

Internet │ Router │ Core Switch ┌─────┴─────┐ │ │ CSE Switch Admin Switch / | \ / \ PC1 PC2 PC3 PC4 PC5

At different levels, this can be viewed as a hierarchical/tree-like network, while each individual access segment may be a star topology.

This is why real networks don't always use just one topology.

Important Terms

Node

A device participating in a network.

Link

A communication connection between devices.

Backbone

A major communication path carrying traffic between network segments.

Central Device

A device such as a switch that connects multiple devices in a star network.

Redundancy

Having alternative paths or components so that one failure doesn't necessarily stop communication.

Easy Memory Trick

Remember the shapes:

BUS ──────────────────── │ │ │ PC PC PC STAR PC │ PC ── SWITCH ── PC │ PC RING PC ─── PC │ │ PC ─── PC MESH PC ───── PC │ \ / │ │ \ / │ PC ───── PC TREE Core / \ Switch Switch / \ / \ PC PC PC PC

One-line definitions

  • Bus: All devices share one backbone.
  • Star: All devices connect to a central device.
  • Ring: Devices form a closed loop.
  • Mesh: Devices have multiple interconnections.
  • Tree: Devices are arranged hierarchically.
  • Hybrid: Combination of multiple topologies.
  • Point-to-Point: Direct connection between two devices.

Keep learning. Keep building. Keep growing.

© 2026 Ugenz Academy